Changes
/* Using the binary */
===Using the binary===
* Plug in your [[SYMBiFACE II]] compatible IDE mass storage interface, [[uIDE 16]], [[M4 Board]], [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/usifac-iimake-your-pc-or-usb-stick-an-hdd-for-amstrad-access-dsk-and-many-more!/ USIfAC II] or [[Albireo]] and attach the proper mass storage device.
* Use your original CP/M Plus system disk set to Boot CP/M Plus.
* Use the provided HDMGR.COM utility in order to format the disk image or partition and transfer the .EMS file to the reserved track. Change the start-up drive letter to that of your first CP/M hard disk.
