UIDE Universal IDE adapter cards for Z-80 computers

From CPCWiki - THE Amstrad CPC encyclopedia!
Revision as of 11:51, 7 February 2017 by JonB (Talk | contribs)

Jump to: navigation, search

About uIDE 16

uIDE 16 is a universal Z80 IDE card that can be configured for use on the CPC range of computers.

Project status

As of now (Feb 2017) it is in the design phase, but the board has been laid out:

http://www.cpcwiki.eu/forum/amstrad-cpc-hardware/cpc-ide-adapter-anyone/?action=dlattach;attach=21727;image

Feature list

  • Compact design, only 4 ICs and a smattering of discreet PCW prototype & driver demonstration videoscomponents. Board measures 78.99x59.59mm (will probabbly upsize it to 80x60)
  • Can be connected to the expansion port or internally via a Z80 shim card (note, this requires a socketed Z80).
  • Driver supports CP/M Plus only at this time.
  • CP/M driver runs the IDE device in LBA / 8 bit mode, so DOMs or CF cards are recommended (up to 128MB).
  • Fully programmable I/O address decoding (via on-board jumpers). Initial I/O range (for the CPC driver) is FEF0-FEF7.
  • Can be used on any Z80 computer with a socketed processor.

More information

uIDE 16 discussion thread PCW uIDE discussion thread PWC uIDE prototype demoonstration videos

Retrieved from "https://gryzor.info/index.php?title=UIDE_Universal_IDE_adapter_cards_for_Z-80_computers&oldid=97194"