Microgenic EPROM Programmer
From CPCWiki - THE Amstrad CPC encyclopedia!
Revision as of 13:21, 11 August 2010 by Nocash (Talk | contribs) (Created page with "EPROM Programmer from Microgenic Systems. Reportedly requires a 15 volt AC power supply which plugs into the socket located at the top right hand corner of the board (not co...")
EPROM Programmer from Microgenic Systems.
Reportedly requires a 15 volt AC power supply which plugs into the socket located at the top right hand corner of the board (not confirmed / no warranty).
Uses a NEC uPD71055 chip, which seems to be an (exact?) clone of the more common 8255 PPI chip. The (blank) EPROMs are to be inserted in the 28pin Textool (located at the upper edge of the board).
.jpg)
