== Tutorial ==
=== Installing ''Exomizer '' ===
Firstly, download ''Exomizer'' from the home page; the link is at the bottom of this article.
Remember the safety offset that was mentioned earlier? The game code starts at &200 and is &7520 bytes long, so the final byte is located at address &200 + &7520 - 1 = &771F. As the safety offset for <tt>BOULDERC.BIN</tt> is 2 bytes, this means that the final byte of this file can be located at any address from &771F + 2 = &7721 or above. This means that the lowest start address that the file can be loaded to is &7721 - &2AD8 + 1 = &4C4A (or 0x4C4A), so enter this value as the start address. The entry point should be left at 0x0000.
The Z80 assembler source code for decompressing files is located in the <tt>rawdecrs\z80\</tt> subfolder, and the file name is <tt>deexo.asm</tt>. The decompression routine is 198 bytes long, and it also requires a buffer of 156 bytes. The buffer is labelled <code>exo_mapbasebits</code>, and it is located immediately after the decompression routine, but you can alter it (by adding the line <code>exo_mapbasebits equ &xxxx</code>) so that it is located anywhere in memory - as long as it doesn't overwrite the compressed file or the decompressed data! Assemble the decompression routine to a suitable address in memory using an assembler of your choice (e.g. ''[[Pasmo]]'' or ''[[WinAPE]]'''s built-in assembler); again, ensure that it doesn't overwrite the compressed file or the decompressed data. The code supplied with ''Exomizer'' may need to be edited to suit the syntax of your assembler.
Now you will need to add some code to load <tt>BOULDERC.BIN</tt> into memory and decompress it. Add the following code before the decompression routine:
Finally, run this code, and if you have done everything correctly, you should see the ''Boulder Dash'' title screen!
== Bugs ==
''Exomizer'' can sometimes fail to decompress files correctly for no apparent reason, causing the CPC to crash. Unfortunately there is no known way to overcome this problem, other than to use a different compressor.
== Links ==