Changes

AMRAM2

1,087 bytes added, 20:38, 22 September 2009
Moved AMRAM2 article
''AMRAM2'' is a ROM board from [[Silicon Systems]].

The AMRAM has two PCBs sitting on top of each other, joined with a rigid connector.

On the bottom is passthrough for other expansion connectors and a 3V square lithium battery.

On the top, 32K RAM (contents are held by lithium battery so can survive a reset or power off), which can be programmed like ROM and occupies two ROM positions (1 and 2 I think).
Also sockets for more ROMs up to max 7.

Also there is a bank of DIP switches to enable/disable ROM slots, a switch to enable/disable writes to 32K RAM, a LED to indicate RAM is ready to write and a switch to reset computer.

It seems the first few batches of these were distributed without boxes, so you had to provide your own, because the box I have with mine is home made.

I/O ports for enabling RAM - not know yet. Will add when I find them out.

Came with software to program it.

This came after the AMRAM which was 16K ram on a board which could be programmed and which occupied ROM slot 5. More details when I can find them in my documents.

[[Category:Peripherals]]