== CPC664/CPC6128 ==
The following table lists the signal on the "2nd Disk Drive" connector on the back of the CPC664/CPC6128
Signal names in simple brackets show the meaning the signal has today.
For your convenience, the pin no. are given as specified in the Shugart standard first, followed by the pin no. as assigned by Amstrad and shown in the manual.
Note that pins 35 and 36 (Amstrad enumeration) exist on Schneider CPC6128 only due to the use of a 36pin Centronics connector.
{|{{Prettytable|width: 700px; font-size: 2em;}}
|''Pin No. (Shugart)''||''Pin No. (CPC manual)''||''Signal Name''||''Description''
|n/a||35||N/C||Schneider CPC6128 only
|-
|2||33||N/C(/REDWC)||Density Select 1=Low/0=High
|-
|4||31||N/C||Reserved
|8||27||/Index||0=Index
|-
|10||25||N/C (/MOTEA)||-/- (0=Motor Enable Drive 0 (N/C on CPC)
|-
|12||23||/DRVSB||Drive Select 1
|-
|14||21||N/C (/DRVSBDRVSA)||-/-(Drive Select 0 (N/C on CPC)
|-
|16||19||/MOTEB||0=Motor Enable Drive 1 (CPC: Motor Enable)
|-
|18||17||/DIR||0=Direction Select