The priority sequence for interrupts, from top priority to bottom, is as follows: RESET, BRK, NMI, IRQ. [https://www.westerndesigncenter.com/wdc/documentation/w65c816s.pdf Source at chapter 7.19]
<br>
=== Interrupt hijacking ===
On NMOS, if NMI is asserted during the first 4 ticks of a BRK instruction, the BRK instruction will execute normally at first (PC increments will occur and P will be pushed with the BF flag set), but execution will branch to the NMI vector instead of the IRQ/BRK vector. On CMOS, this situation is correctly handled by executing BRK and then servicing the interrupt.