|[[File:hdcpm-s3.png|thumb|HDCPM ROM - Symbiface III]]
|}
In case a RTC is detected you will also see the RTC initialization message and the current date and time: ''RTC found: 2021/01/01 12:01:01''
* Use your original CP/M Plus system disk set to Boot CP/M Plus.
* Use the provided HDMGR.COM utility in order to format the disk image or partition and transfer the .EMS file to the reserved track. Change the start-up drive letter to that of your first CP/M hard disk.
* Copy any other needed application etc. to your CP/M hard disk(s).
* You are ready to go.<br />
===Using the binary===
* Plug in your [[SYMBiFACE II]] compatible IDE interface, [[uIDE 16]], [[M4 Board]] or [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/usifac-iimake-your-pc-or-usb-stick-an-hdd-for-amstrad-access-dsk-and-many-more!/ USIfAC II] and attach the proper mass storage device.