<gallery>
Image:F1DCONT.jpg|F1-D Interface Board (CPC 6128)
</gallery>
== FD-1 Disk Drive Adapter ==
This adapter allowed to use an Amstrad FD-1 3" drive on Vortex F1/M1 setups connected to a CPC 464. Since only two drives can be used simultaneously, the 3" drive had to be mounted using a RSX command ("|S,1" as drive A, "|S,2" as drive B, "|S,0" to disable the 3" drive).
<br />
* [[Media:3-Zoll-Adapter zur VORTEX-Diskettenstation.pdf|3" Adapter zur VORTEX-Diskettenstation]] {{DE}} (manual)
<br />
<gallery>
Image:Vortex 3rd drive adapter.jpg|Adapter to connect an additional 3" disc drive in between a CPC 464 and a F1/M1
Image:Vortex 3rd drive adapter insides.jpg|Inside the adapter box
Image:Vortex 3rd drive adapter insides closeup.jpg|Inside the adapter box (closeup)
</gallery>
| 0xFBDF || Write mode word || -
|}
== FD-1 Disk Drive Adapter ==
This adapter allowed to continue using a FD-1 3" drive on certain Vortex F1 setups. Since only two drives can be used simultaneously, the 3" drive had to be mounted using a RSX command ("|S,1" as drive A, "|S,2" as drive B, "|S,0" to disable the 3" drive).
<br />
* [[Media:3-Zoll-Adapter zur VORTEX-Diskettenstation.pdf|3" Adapter zur VORTEX-Diskettenstation]] {{DE}} (manual)
<br />
<gallery>
Image:Vortex 3rd drive adapter.jpg|Adapter to connect an additional 3" disc drive in between a CPC 464 and a F1-D
Image:Vortex 3rd drive adapter insides.jpg|Inside the adapter box
Image:Vortex 3rd drive adapter insides closeup.jpg|Inside the adapter box (closeup)
</gallery>
== VDOS ==