Providing a game had to deal with 1bpp to 2 bpp conversion, Software Sprites and Scrolling and complicated gameplay, adding some Raster interrupt to the equation is a really bad move and a good way to waste even more CPU time.
[[File:Interrupt_positions_spectrum_sized_screen.png|Screenshot of ==Amstrad interrupt positions showing where mode and colours can be changed quickly relative to pixel graphics. R1=32, R2=42, R6=24,R7=30]]
The following image shows where the Amstrad's interrupt positions are located relative to the screen. Here the CRTC Register values used are R1=32, R2=42, R6=24 and R7=30 and the colours are changed at the start of the interrupt.
To have different positions vertically you can change the value of R7 (and if the monitor will accept it R5) to move the screen up and down.
For example Gryzor sets R7=29 to have a 1 char tall panel at the bottom in mode 1.
To change at later positions you can also use a software timing loop, or fill the time with other code to delay the colour change from a chosen interrupt position.
[[File:Interrupt_positions_spectrum_sized_screen.png|Screenshot of Amstrad interrupt positions showing where mode and colours can be changed quickly relative to pixel graphics. R1=32, R2=42, R6=24,R7=30]]
[[Category: Games| ]][[Category:Programming]][[Category:Games Programming]][[Category:CrossDev]][[Category:CPC History]][[Category:Non CPC Computers]]