The Schneiderware series consists of several DIY projects which have been released 1986-1987 in german magazine CPC Schneider International published by DMV. The name "Schneiderware" was probably choosen due to its double meaning ("CPC Hardware" in computer language, or "designer clothing" in german language). Aside from building the hardware on one's own, one could also order printed circuit boards, either fully assembled, or plain PCBs without components.
The various boards are having special connectors, intended to be mounted on the "Basisplatine" (some kind of a motherboard with ECB Bus sockets) which allows to connect up to five Schneiderware boards to the CPCs Expansion Port; with some small modifications one could also connect the boards directly to the Expansion Port (the motherboard is merely an Y-cable-like adaptor without electrical components, so one doesn't really need it).
- Schneiderware #1 Introduction (Theory)
- Schneiderware #2a Basisplatine (Motherboard)
- Schneiderware #2b Centronics (Printer Port)
- Schneiderware #3 V/24 (RS232 Interface)
- Schneiderware #4 Netzteil (Power Supply)
- Schneiderware #5 Echtzeituhr (Real Time Clock)
- Schneiderware #6 Uni-PIO (48 I/O lines)
- Schneiderware #7 Analog Converter (8 analog inputs, 2 analog outputs)
- Schneiderware #8 Pseudo ROM (SRAM and EPROM mapped as ROM)
- Schneiderware #9 Eprommer (EPROM Burner)
A summary of the I/O ports, Schematics, Photos, and all scanned articles can be found here:
Note - Along with the Schneiderware series, there has been also a "CPC Schneider International 02/1987, Page ??-??, MIDI Interface" (advertised together with the Schneiderware PCBs, but not part of the Schneiderware series).
