1,009 bytes added,
08:26, 28 February 2011 [[Image:AD724.JPG|400px|right]]
== Description ==
The AD724 is a complete RGB to S-Video converter on a chip, requiring just a few minor external components.
== Building Your Own RGB To Composite Converter ==
The AD724 is only available in an SMD package. You can choose to make the entire PCB in SMD or use standard parts for the external components.
== Schematic ==
The following schematics are confirgured for PAL TVs. If you are in an area where NTSC is in use, please see the note below regarding pinout changes.
== Resources ==
The following files are the PCB and component position layouts to construct the circuit above:
(Files to be uploaded)
== NTSC ==
Pin 1 of the AD724 selects whether the output is in PAL or NTSC format. In the schematics and layouts above, pin 1 is grounded to select PAL, should you require NTSC, this pin needs to be disconnected from the ground and connected to a 5V signal.
[[Category:Hardware]] [[Category:Peripherals]] [[Category:DIY]][[Category:Graphic]]