* '''Size: 320x155 mm'''
[[File:CPC6128_PCB_Top_(Z70290_MC0020B).jpg|200px160px|left]]
* '''Board: PT NO Z70290, MC0020B, R1706-94HB, Copyright 1985'''
* Can be fitted with Amphenol connectors (done in germany) (instead Edge connectors).
<br style="clear:both;">
[[File:CPC6128 MC00201 RobertoCarlos.jpg|200px160px|left]]
* '''Board: PT NO Z70290, MC0020I, 94V.0-FR-4, Copyright 1985'''
<br style="clear:both;">
[[File:NightfallcrewSchneider6128pcb.jpg|200px160px|left]]
* '''Board: PT NO Z70290, MC0023D, 94HB-R1706, Copyright 1985'''
* Sold in germany, with Amphenol connectors (and dummy edge-connectors which don't have any contacts, and which are covered by green solder-stop layer, seen on [[Media:NightfallcrewSchneider6128pcb bottom.jpg|bottom side]]), front of mainboard has several vias for giving better contact to shielding plate).
<br style="clear:both;">
[[File:Schneider6128shielding.jpg|200px160px|left]]
* '''Shielding as found in german Schneider models'''
<br style="clear:both;">
[[File:CPC6128 Z70290 MC0057A with cooling plate cpcmania.jpg|200px160px|left]]
* '''Board: PT NO Z70290, MC0057A, Copyright 1985'''
* An uncommon version. The cooling plate indicates suggests that this CPC 6128 board was would be downgraded for supporting the pin-outs of the old gate array (?) . Most bizarre, the /INT resistor, R144, has white coating, seen at lower-left edge of the cooling plate. On 464 boards similar coating is used on VCC2 resistors. Most likely, this board is a homebrew joke, modded to fool other people.
<br style="clear:both;">