14 /Fire 2 Player 2 Fire 2
15 Ground +5V (Soundblaster: Midi RxD)
* Two analogue joysticks could be connected by using an Y-cable. The Fire signals are the same as for the normal (digital) joystick port. Joystick 1 buttons should be connected to Pin 2,4,6, and joystick 2 buttons to Pin 10,12,14. Like the digital [[Joystick Y-cables]] the analog Y-cable should have '''diodes''' in the button lines.
* The A/D inputs have an input range of 0V (data = 00) to 2.5V (data = 3Fh), and an input impedance of 180k to Vcc.
* Not sure if the POTs on the CPCs analog X/Y inputs are to be wired to 5V or GND? And, how they are wired on PCs accordingly?