[[File:Asic-pin-91.png|framed|center]]
This is the tricky part: soldering the wire to this leg is rather difficult, since it is very small. Also double check that no connection occurs between the surrounding legs afterwards. (Using an ohmmeter, for example.) I used the ceramic capacitor to hold the wire in place while soldering.
[[File:Soldering-wire-on-leg-91.png|framed|center]]
Here is what it looks after soldering wires on RAM legs 16.
[[File:Ram-and-wire-connected-to-asic.png|framed|center]]
(I'm not that proud of my color choices, nor of my soldering skills...