Disc Wizard

The Disc Wizard was an addon from Draysoft & Evesham Micro Centre that allowed you to make dumps of the CPC memory to external storage, pretty much like the Multiface and similar interfaces.

Technical

Button triggers NMI
8K ROM data has 4 regions. There is an NMI vector at offsets &0066, &0866, &1066 and &1866 within the ROM data. This suggests each of the 4 regions is selectable and mappable into the range &0000-&7ff.

What is not clear is that when the chosen region is mapped into the Z80 memory space if the region in &0000-&7ff is repeated through to the end of &3fff.

* Region 0 appears to be for saving "DraySoftONE". 
* Region 1 appears to be for loading "DraySoftONE"
* Region 2 appears to be saving for "DraysoftTWO". 
* Region 3 appears to be for loading "DraysoftTWO"

It seems that the "1/2" switch on the PCB chooses between which 4k (assumption it is connected to A12 of the EPROM), then the "load/save" switch chooses between the 2k within that 4k (assumption it is connected to A11 of the EPROM).

Dissassembly of the code indicates it uses direct FDC disc access for loading/saving.

Dissassembly of the code indicates it uses an I/O port &f0e0, and sends the data 0,1,2 or 3. It is not clear the function or the exact decoding of this port.

It is restricted to loading/saving using DATA format disc.

Unanswered questions:

What happens when a reset is triggered?
What is the decoding of the I/O port?
Can the ROM be paged in and read through software?
Can you have other files on the disc at the same time or is it a special disc format?