Open main menu
Last modified on 31 August 2006, at 16:41

Robotron 6313

Revision as of 16:41, 31 August 2006 by SpaceRat (Talk | contribs) (→‎Manual)

The Robotron 6313 printer was a 9-needle dot matrix printer manufactured by the VEB Robotron (East Germany)

What made it special and worth mentioning in the CPC-Wikipedia is the fact that it could be DIP-switched to be 100% compatible with the Amstrad/Schneider NLQ401, that means it could print the whole CPC character set and understood the code sequence to switch the 8th bit.
In Western Germany it was sold under the names Präsident 6313 or Europrint FT80X

Technical Specs.

Mechanical data (excerpts)
print principle: serial dot matrix printer with pin system
print speed: 100cps
print direction: bidirectional with logical optimization for the print head movement
number of pins: 9
copies: 1 original plus 2 carbon copies
overall thickness max. 0.3mm
max. areal weigth 80g/m²
printer cassette: type 615
FBK 1
Tally 1000 or equivalent
Electrical data
input voltage: 220V +10%/-15%
110V +10%/-15%
frequency: 47-63Hz
power consumption: max. 70W
Environmental conditions
temperature: 10-35°C
rel. humiditity: 40-90%
noise level: max. 58.5dB (AS)

Weblinks

Manual

Setting DIL switches
Nr.FunctionOFFON
5-1case contactdon't use
5-2N/C
6-1paper endactive/td>inactive
6-2buzzeractiveinactive
7-1autom. line feedno LF on CRautom. LF on CR
7-2FunctionOFFON
8-1FunctionOFFON
8-2FunctionOFFON
9-1FunctionOFFON
9-2FunctionOFFON
10-1FunctionOFFON
10-2FunctionOFFON
11-1FunctionOFFON
11-2FunctionOFFON
12-1FunctionOFFON
12-2FunctionOFFON
13-1FunctionOFFON
13-2FunctionOFFON
14-1Functioninactiveactive
14-2FunctionOFFON
15-1FunctionOFFON
15-2FunctionOFFON
16-1FunctionOFFON
16-2FunctionOFFON
17-1FunctionOFFON
17-2FunctionOFFON
18-1FunctionOFFON
18-2FunctionOFFON