The Robotron 6313 printer was a 9-needle dot matrix printer manufactured by the VEB Robotron (East Germany)
What made it special and worth mentioning in the CPC-Wikipedia is the fact that it could be DIP-switched to be 100% compatible with the Amstrad/Schneider NLQ401, that means it could print the whole CPC character set and understood the code sequence to switch the 8th bit.
In Western Germany it was sold under the names
Präsident 6313
or
Europrint FT80X
Technical Specs.
| print principle: | serial dot matrix printer with pin system |
| print speed: | 100cps |
| print direction: | bidirectional with logical optimization for the print head movement |
| number of pins: | 9 |
| copies: | 1 original plus 2 carbon copies overall thickness max. 0.3mm max. areal weigth 80g/m² |
| printer cassette: | type 615 FBK 1Tally 1000 or equivalent</td> |
| input voltage:</td> | 220V +10%/-15% 110V +10%/-15%</td> |
| frequency:</td> | 47-63Hz</td> |
| power consumption:</td> | max. 70W</td> |
| <bold>Environmental conditions</bold></td> | |
| temperature:</td> | 10-35°C</td> |
| rel. humiditity:</td> | 40-90%</td> |
| noise level:</td> | max. 58.5dB (AS)</td>
</table> Pictures
WeblinksManualThe procedure of setting up the CPC with the MP-1/MP-2 modulators is described in the CPC's user manual. |
