Aleste 520EX

Aleste 520EX - a CPC clone housed in a case with MSX keyboard

The Aleste 520EX is a clone of the Amstrad CPC 6128 developed 1993 Patisonic in Omsk (Siberia). The Aleste is rare. The only existing photos are from http://aleste520.narod.ru. According to Patisonic themselves, they "produced several dozens of the model, some of them was in 'kit' form".

Additionally to the standard CPC6128 features, it includes a number of extra features: 64-color palette, double color depth (eg. 16 color at high 320x200 resolution), battery-backed Real Time Clock chip, 512Kbyte RAM (of which 192K can be accessed as on 64K CPC with 128K dk'tronics memory expansion), 8bit printer port, expanded keyboard matrix with 10 additional keys, two software controlled LEDs, extended Expansion Port (with additional pins for DMA support).

The computer works with Amstrad CP/M and MSXDOS as well (note: MSXDOS is a CP/M clone, which uses a FAT filesystem, as used on MSX and MS-DOS computers, instead of the normal CP/M filesystem).

Differences:

- Interrupts can't be manually cleared. This was possible on the CPC by writing to the Gate Array with data bit 7 set 1, bit 6 set to 0 and bit 4 set to 1. In the Aleste this bit is controls an LED.

- Decoding of it's equivalent of the Gate-Array is based on A15 only.

- The Aleste uses a patched CPC6128 Operating System ROM. It is patched to use the Aleste's 8-bit printer port and has a different startup message.

At this mode computer have different memory manager. The manager seems same like MSX mapper and could swicth ON any 16KB page of whole memroy at the any of 16KB page of CPU memory.

The mode have different color coding system. It has the color lookup table (CLUT) or another name pallette. That is dual port memory one prot for coversion pixel's color number to RGB levels. But second for CPU acccess. There is 2 bits for each channel at the pallette present, then it lets to have 64 colors.

The mode have two additional modes with 32KB of video memory. Pixel encoding the same as at Amstrad mode but each line has twice more bytes (and pixels). Two 16KB pages transfer to output, one buffer for odd and second even lines of screen.

The computer have also mc146818 compatible RTC and a 8251 compatible serial. A serial mouse can be used.

The 8253 timer is used to generate transmit and receive clock for serial. In addition the CURSOR output of the CRTC is connected as a trigger which is then connected to the colour hardware. So the CRTC cursor can be used to switch colours by the hardware.

Aleste ROM is 64KB, additional page have BIOS SETUP and MSXDOS Boot Loader.

The BIOS SETUP lets control over: date and time, boot drive, RAM disk, screen mode and style, printer, serial port, and mouse.

At the boot time computer loads BIOS and MSXBDOS (BIOS for Disc BIOS) from a bood disc. After that COMMAND.COM (MSXDOS). Computer can bott from RAM disc as well. Computer go to AMSTRAD mode when "Shift" is pressed while reset.

• Magic Sound Board

Additional sound board MagicSound is a four channel DMA playback. Supports 8 bit per sample, 6 bits of volume per channel, and 16bit samplerate timer per channel. Computer uses the board for playing STM (Scream Tracker) files.

Computer have "GameBios" with is emulator of VDP9938. it was sufficiently - to replace the first several kilos-byte of game and MSX2 game worked. Certainly, video processor MSX is by apparatus sharpened for the games, but they worked sufficiently rapidly to 8MGts of game on "alesta" in order in them to play. Game "FireBird" typical "vertical scroller" worked very well.

Another additional board FOTON is a "Light Processor". The board have D54 interface and Aleste with special FX application controls over club's light.

<gallery="Pictures from http://aleste520.narod.ru"> File:Aleste Open.jpg|PCB and Keyboard File:Aleste PCB Top.jpg|PCB top (component side) File:Aleste PCB Bottom.jpg|PCB bottom (solder side) File:Aleste PCB Illustrated.gif|PCB illustrated </gallery>

The above photos are showing a more or less fully assembled Aleste (the LEDs are missing, and, more important, there is no connection for an internal or external power supply attached to the mainboard - unless the owner used the Expansion Port connector to inject power supply voltages).

<gallery="Pictures from http://www.zonadepruebas.com> File:Deepfb-aleste-with-keyboard.jpg|PCB and Keyboard File:Deepfb-aleste-without-keyboard.jpg|PCB only File:Deepfb-aleste-rear-connectors.jpg|Rear-connectors File:Deepfb-aleste-bottom.jpg|Bottom </gallery>

This version has 7pin+7pin sockets for printer (normal would be 5pin+7pin, though the extra pins are most probably left unused).

• 

  Schematic 1/4

• 

  Schematic 2/4

• 

  Schematic 3/4

• 

  Schematic 4/4

• 

  Component Map

• Media:Aleste-Programming-Manual-English.txt - original programming manual (english version, ported to ASCII format)

1.Mapper bits 7 and 6 of the data must be 1 for the Mapper write.

2.Printer data-bits are connected to AY I/O port B.

3. Multiport is similar to the Gate-Array in cpc.

5. If bit 3 is set, border is selected. Otherwise bits 3..0 define the pen index.

6. The number is converted by IC D62. When MAPPER is set in EXTPORT, then the numbers effectively define R,G,B with 2 bits per element, but the rom then changes the order of the bits before it gets to the hardware. When MAPPER is not set, the number is equivalent to the CPC's Gate-Array colour value, but this is looked up in IC D62 and converted into a 2-bit per element R,G,B for the aleste video hardware.

7. bit 0,1 define the mode. The actual resolution is then dependant on bit 1 of EXTPORT.

8. bit 2 is the enable/disable for the lower rom. bit 3 is the enable/disable for the upper rom. bit 4 defines the RUS led. bit 5 defines the CAPS led.

9. The number is looked up in IC and converted into another number which is the 16K page index in the Aleste's internal 64k ROM.

10. bit 2 = enable/disable MAPMOD (changes how colour is decoded and how mapper values are decoded), bit 3 = force video to black, bit 4 = Enable 8253 timer. Any I/O write then accesses 8253 with data comming from 8255 port A. Bit A0/A1 of I/O port defines 8253 register, bit 5 = if 0, then AY is accessed when read/write to 8255 port A, if 1 then real-time clock is accessed with read/write to 8255 port A. When real-time clock is selected, bits 3..0 of PPI port C are used to define real-time clock operation. DS bit 2, AS bit 1, R/W bit 0. So combinations are 2, write address, 4 write data, 5 read data.

The Aleste uses a MSX keyboard, as seen by the characteristic five function keys. The mainboard contains some excessive TTL logic, assisted by the upper data bits of the VDKEY eprom, that translates the MSX matrix to a CPC matrix.

So, at I/O port level, the CPU "sees" a CPC matrix, not a MSX matrix. When running MSXDOS, this leads to the funny situation that MSXDOS must undo the hardware MSX-to-CPC translation by some software CPC-to-MSX translation.

The keyboard has some additional keys, which aren't on normal CPC keyboards:

• F1/F6, F2/F7, F3/F8, F4/F9, F5/F10 - MSX-style function keys, mapped to keyboard row 10, bits 7,6,5,4,3.
• HELP, INS, b - additional keys, mapped to keyboard row 10, bits 2,1,0.
• R/L - Russian/Latin mode, mapped to keyboard row 9, bit6 (aka joystick Fire3).
• RES - Reset button, goes to /RESET signal.
• Four unknown keys - These keys (above the numeric keypad) may be unused, or having same function as other keys?

The Aleste has a JCUKEN keyboard, rather than a QWERTY keyboard.

• Unknown if this done by hardware, or by patched CPC bios (?)
• Normally, the key next to TAB should be Row8.Bit3 in the CPC matrix. And the BIOS should assign "Q" to it for QWERTY keyboards (or "J" for JCUKEN keyboards).

 _____ _____ _____ _____ _____                 _____ _____ _____   _____ _____
|F1/6 |F2/7 |F3/8 |F4/9 |F5/10|               |HELP |INS  | DEL | |N/A  | RES |
|_____|_____|_____|_____|_____|               |_____|_____|_____| |_____|_____|
 _____ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ _____   ___ ___ ___
| ESC | ; | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | _ | b |  BS | |N/A|N/A|N/A|
|_____|___|___|___|___|___|___|___|___|___|___|___|___|___|_____| |___|___|___|
|  TAB  | J | C | U | K | E | N | G | { | } | Z | H | : | / |   | | F7| F8| F9|
|_______|___|___|___|___|___|___|___|___|___|___|___|___|___|   | |___|___|___|
|  CTRL  | F | Y | W | A | P | R | O | L | D | V | \ | . |RETURN| | F4| F5| F6|
|________|___|___|___|___|___|___|___|___|___|___|___|___|______| |___|___|___|
|CAPS| R/L | Q | | | S | M | I | T | X | B | @ | '  |   | U |   | | F1| F2| F3|
|____|_____|___|___|___|___|___|___|___|___|___|____| L |___| R | |___|___|___|
|  SHIFT | COPY|         SPACE              | SHIFT |   | D |   | | F0| F.|ENT|
|________|_____|____________________________|_______|___|___|___| |___|___|___|

• CPU: Z80
• Clock: 4Mhz (CPC mode derived from a 16Mhz crystal), 3.2Mhz (Aleste mode derived from a 13Mhz crystal)
• Memory manager: Dk'Tronics compatible memory mapper (CPC mode), msx-mapper (Aleste mode)
• Memory: 512КБ (up to 2МБ)
• Audio: AY8910
• Graphics:
  • 256x212:16 colors
  • 512x212:4 colors
  • 320x200:16 colirs
  • 640x200:4 colors
  • 640x400:4 colors interleaved
  • Palette 64 colors
  • Hardware scroll (standard CRTC hardware scroll)
• Floppy disk 3.5"
• Mouse
• RTC (mc146818 compatible)
• Expansion slot
  • 19 address lines
  • DMA to whole memory
  • External board MagicSound
    • 4 channels
    • 8 bits per channel
    • Stereo output
• Touch screen (only prototype)
• Light-Processor with D54

• MSXDOS
• С compiler
• GUI Debugger
• GameBIOS with VDP emulator
• Text editor PowerEdit
• Text files converter TRC. Convert between MSX, Aleste, and DOS
• Disk Fixer (ported)
• Disk Edit (ported)
• Image viewer
• Player of S3M, STM files
• Editor of S3M, STM files
• Games ported from MSX2
  • VampireKiller
  • KingValery 2
  • FireBird
  • MetalGear