The 8KB "extra" memory, was in fact a single 4164 DRAM chip. This chip stores 64 Kbits. Its data bus was only one bit. So, it weren't unable at all to use this chip to have 8 KBytes, as the Z80 needs memory to be 8 bits wide.
As there were no space for a new chip, Amstrad designers took off one of the ROM chips, and put it in a daughter board, along with the 4164 chip. Wires connected pins at the ROM from the daughter board to the corresponding pins on the main board. The wires were hard enough to make difficult to turn the daughter board over and reveal the trick: no wires were connected from the DRAM chip, to the main board. Even supply pins were not connected!!
While based on the CPC 464, at least some of the 472 got the ROM v2 with Locomotive BASIC 1.1, which normally was built into the CPC 664.
After the rule changed there was also a CPC 472 with non-spanish keys available for a very short time. The CPC 472 with spanish or british keyboard is very very rare.