COSMOS is a personal COSt MOnitoring System programed by KSL for the CPC6128. It is an application for the CP/M-80 operating system, which was the industry standard of the late 70s - early 80s. COSMOS can be used on an everyday basis in order to edit the daily income, plan the monthly expenses and perform trial and error analyses aiming at maximizing the annual profit. This budget monitoring system is a business application similar to the MSDOS-era PC applications and one of the most recent (2020) projects developed for CP/M-80. Unlike most applications for CP/M, COSMOS is built upon the mouse based graphics user interface as pioneered by Xerox at Palo Alto and popularized by Apple with the Lisa and Macintosh computers. COSMOS supports all the hardware peripherals that were (contemporary) available for the CP/M applications of the CPC6128: the 512 KB Dobbertin Memory Expansion, the ParaDOS or X-DDOS ROMS for the external (800 KB) floppy drive, the 20 MB Dobbertin Harddisc, the Amstrad Serial Interface, the Amstrad Parallel Printer Port, the CTM640/CTM644 colour monitor for the screen saver and the AMX Mouse. In order to accomplish its task, COSMOS includes its own GSX and requires the Dobbertin version of CP/M 2.2 (v1.2) which provides 63 KB TPA. Notice that the software also contains the latest version of ASCII Tools.
In addition to the command and chain files, COSMOS original disc also contains the CP/M 2.2 (v1.2) boot sectors as well as an installation utility. By executing the latter utility (A>SETUP) the user can initialize any annual project or start a temporary project in order to become familiar with the COSMOS user interface and functions. Upon installing COSMOS in drive B or HD20 it is suggested to execute COSMOS using all the available extra RAM (no RAM load minimization) and to use a new empty CP/M 2.2 (v1.2) boot disk in drive A as the redundant disk. Notice that a full annual project of COSMOS, including the user attachments, the user block of invoices, the summary files as well as the user agenda notices requires minimum 350 KB of disc space. As far as the controls are concerned, Cursor keys or Mouse can be used in order to control the pointer. [F0] key simulates the left button of the mouse, whereas [F.] key simulates the right button of the mouse. Left button can be used for (Yes), whereas the right button can be used for (No),(Next) or (On-Board) help. ESC key can be used to quit.
Notice that COSMOS output files can also be processed with MicroScript (142 KB), WordStar (706 KB), Protext (406 KB), Multiplan (208 KB), SuperCalc 2 (240 KB), DBase II (272 KB), DR Draw (235 KB), DR Graph (306 KB) as well as other Programming software for CP/M-80.
To download the latest version of COSMOS (v.26/December 2020) use the link located at the bottom of this page. Boot CP/M 2.2 v1.2 using the original COSMOS disk and execute A>SETUP.COM. Next version: December 2021 (includes Logbook, accumulator of sorted expenses and income and revised on board help).