DIY Cartridge
From CPCWiki - THE Amstrad CPC encyclopedia!
Description
The file below is the PCB Layout for a standard plus cartridge with
a few minor changes:
- No LKs are bridged by default
- LKs use standard PCB jumpers for quick swapping
- All vias are done at component pins to reduce drilling and soldering
The PCB dimensions are identical to an original cartridge and will fit in the original housing. The PCB used should be 1.5mm thick with double-sided 35µm copper.
Components should be mounted on the side with the ground plain.
The Layout file is as always mirror imaged.
Pictures of a finished part to follow soon.
File:Cartridge Layout.pdf - PCB Track Layout
Bryce.
