Last modified on 13 September 2006, at 15:24

Vortex Winchester Drive

Revision as of 15:24, 13 September 2006 by 84.151.226.82 (Talk)

A harddisc solution for the CPC (The first for the CPC) by the German company Vortex

The Harddisc was build about 1986. It have the same cases like the F1-S and the F1-D. A big Power Supply which have about 1,5 Kilograms gives the power to the Harddrive. The Harddrive was shipped with the Powersupply The Harddrive itself, a built in 5,25" DD Diskdrive with 720KB and a Controller which was used for being the MFM Controller with two ports for two MFM Harddiscs, two DD Floppys and a ROM board which give place for 2 Roms, which held the VDOS 2.0 The Contoller get the Power from the Harddisc. You can connect up to two 60MB MFM Drives which are supported by the VDOS 2.0. But the normal setup was with a 20 MB MFM Drive. A Software Package consists of a few helpful tools: LowLevel Format

                                                   Partition tools
                                                   Format partitions
                                                   Patch for CPM 2.2 and 3.0 (Plus) to support the Drive
                                                   File/Disccopy Tools
                                                   Diskformat
                                                   Hexeditor
                                                   and a few more...