Difference between revisions of "SYMBiFACE II:Rewriteable roms"
From CPCWiki - THE Amstrad CPC encyclopedia!
m (→Mechanisms) |
|||
| Line 1: | Line 1: | ||
| − | This article decribes, how to map the '''rewriteable ROMs''' of the [[SYMBiFACE II]] card into the ram area | + | This article decribes, how to map the '''rewriteable ROMs''' of the [[SYMBiFACE II]] card into the ram area so that you can change its content. |
| + | |||
| + | The re-writeable ROMs are stored on a static RAM. The static RAM is powered by a CR2032 battery to remember it's contents when the symbiface 2 is powered down. | ||
== Mechanisms == | == Mechanisms == | ||
Revision as of 05:04, 31 January 2016
This article decribes, how to map the rewriteable ROMs of the SYMBiFACE II card into the ram area so that you can change its content.
The re-writeable ROMs are stored on a static RAM. The static RAM is powered by a CR2032 battery to remember it's contents when the symbiface 2 is powered down.
Mechanisms
Please note, that the following commands ignore all values. So it doesn't matter, what you "out". When you "inp" you won't get any meaningful numbers.
| INP &FD17 | show the current ROM (selected by #df00) between #4000 and #7fff. Now it can be read and rewritten. |
| OUT &FD17 | disable the previouse mentioned ROM write mode. |
| OUT &FD11 | disable all SYMBiFACE II Roms. You won't see any additional ROMS anymore, only the CPCs' inbuilt ones. |
| INP &FD11 | enable the SYMBiFACE II roms. |
