Difference between revisions of "KDS Electronics"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Unidentified Hardware) |
|||
| Line 21: | Line 21: | ||
* Some people say it'd be a serial interface - this may be true, but it's definetly NOT the [[KDS Electronics Serial Interface]] (which has a 50pin connector). | * Some people say it'd be a serial interface - this may be true, but it's definetly NOT the [[KDS Electronics Serial Interface]] (which has a 50pin connector). | ||
* The device looks quite similar to the [[KDS 8-Bit Printer Port]] but with an additional cable attached to it, which isn't attached (or isn't visible) on the 8bit port photo, [[Media:KDS8Bit.jpg]]. | * The device looks quite similar to the [[KDS 8-Bit Printer Port]] but with an additional cable attached to it, which isn't attached (or isn't visible) on the 8bit port photo, [[Media:KDS8Bit.jpg]]. | ||
| − | Actually, the [[KDS 8-Bit Printer Port]] should require a similar cable (for 5V power supply, which isn't available on the CPCs 34pin printer port). So quite | + | Actually, the [[KDS 8-Bit Printer Port]] should require a similar cable (for 5V power supply, which isn't available on the CPCs 34pin printer port). So it's quite possible that the "KDS Interface" and "KDS 8-Bit Printer Port" are the same hardware, both having the cable, but with the cable being not visible on one of the photos for whatever reason. |
Revision as of 06:51, 24 July 2010
A UK-based hardware firm.
Hardware
- KDS Serial Interface
- KDS Power Controller
- KDS 5 1/4" Disc Drive?
- KDS 8-Bit Printer Port
- KDS ROM Board
- Mini-Max Modem
Software
- RAMDOS and ROMDOS (later resold by Siren Software)
Unidentified Hardware
KDS Interface for the Amstrad - there is some confusion on this device.
- Some people say it'd be a serial interface - this may be true, but it's definetly NOT the KDS Electronics Serial Interface (which has a 50pin connector).
- The device looks quite similar to the KDS 8-Bit Printer Port but with an additional cable attached to it, which isn't attached (or isn't visible) on the 8bit port photo, Media:KDS8Bit.jpg.
Actually, the KDS 8-Bit Printer Port should require a similar cable (for 5V power supply, which isn't available on the CPCs 34pin printer port). So it's quite possible that the "KDS Interface" and "KDS 8-Bit Printer Port" are the same hardware, both having the cable, but with the cable being not visible on one of the photos for whatever reason.
