Difference between revisions of "CPC Palette"
From CPCWiki - THE Amstrad CPC encyclopedia!
(Created page with '== CPC6128 R,G,B signals (measured by nocash) == <gallery> File:Nocash-cpc6128rgb-test.jpg|Test File:Nocash-cpc6128rgb-green.jpg|Green File:Nocash-cpc6128rgb-red.jpg|Red File:No…') |
|||
| Line 8: | Line 8: | ||
</gallery> | </gallery> | ||
| − | The pictures are showing the RGB outputs on a CPC6128 with classic (non-cost-down) mainboard (measured between the monitor connector and R126,R128,R130). Each divider is | + | The pictures are showing the RGB outputs on a CPC6128 with classic (non-cost-down) mainboard (measured between the monitor connector and R126,R128,R130). Each divider is 100mV in height. |
The CPC is connected to the RGB input of a Philips Philetta TV Set (this is important for the test, as the monitor does pull-down the signals, without monitor connected both "max" and "half" signals are around 4.0V, with monitor connected they drop to circa 1.0V and 0.5V, as seen in the pictures). | The CPC is connected to the RGB input of a Philips Philetta TV Set (this is important for the test, as the monitor does pull-down the signals, without monitor connected both "max" and "half" signals are around 4.0V, with monitor connected they drop to circa 1.0V and 0.5V, as seen in the pictures). | ||
Revision as of 13:22, 1 April 2010
CPC6128 R,G,B signals (measured by nocash)
Test
Green
Red
Blue
The pictures are showing the RGB outputs on a CPC6128 with classic (non-cost-down) mainboard (measured between the monitor connector and R126,R128,R130). Each divider is 100mV in height.
The CPC is connected to the RGB input of a Philips Philetta TV Set (this is important for the test, as the monitor does pull-down the signals, without monitor connected both "max" and "half" signals are around 4.0V, with monitor connected they drop to circa 1.0V and 0.5V, as seen in the pictures).
