Difference between revisions of "CM14"
(→Pictures) |
(→Pictures) |
||
| Line 30: | Line 30: | ||
Image:Cm14_label_back.png|Back of CM14 showing label | Image:Cm14_label_back.png|Back of CM14 showing label | ||
Image:Cm14_pcb1.png|Part of PCB showing H-HOLD, V-SIZE and SUB-BRIGHT markings | Image:Cm14_pcb1.png|Part of PCB showing H-HOLD, V-SIZE and SUB-BRIGHT markings | ||
| + | Image:Cm14_focus.png|Part of PCB showing Focus adjustment | ||
</gallery> | </gallery> | ||
Revision as of 15:09, 2 April 2018
This was the colour monitor sold together with the CPC464plus/CPC6128plus computers.
It was also available as an option to the GX4000 video console.
As the disk drive of the CPC6128plus didn't need 12V anymore, the monitor provided a 5V power supply only. Unlike the precedessors CTM640/CTM644 it also had built-in stereo speakers and thus a different connector for the signals. It can therefore not be used for the classic CPCs without adaptor cable.
Technical Specs.
| Tube diameter: | 36cm/14" |
| Visible diameter: | 34.5cm/13.5" |
| Input voltage: | 220V~/50Hz |
| Power consumption: | 67W |
| Output voltage: | 5V 2.4A |
Pictures
- CM14 internals
PCB on the tube
Back of CM14 showing VHOLD
Back of CM14 showing label
Part of PCB showing H-HOLD, V-SIZE and SUB-BRIGHT markings
Part of PCB showing Focus adjustment
Weblinks
User Manual
The procedure of setting up the CPCplus/GX4000 with the CM14 monitor is described in the CPC464plus/CPC6128plus and GX4000 User Manual.
