Difference between revisions of "ARA Video Digitizer"

Revision as of 18:12, 3 May 2010

A video digitizer made by Philippe Borg in 1987, for a french company called Jagot & Leon. The french name of the hardware is Digizaliseur Ara (seen on sticker), or Ara Digitaliseur d'images video (seen on screenshot).

ARA is said to be simply referring to the colourful parrot with same name (rather than being an abbreviation for something like analog recording apparatus or so).

Keyboard Controls

The software is very far away from having an intuitive GUI. Some screens are showing some function names like "DIGITIZE", if there are no further instructions given: Try pressing the first letter of that word (ie. "D" for "DIGITIZE"). Some screens are using "rows" of keys on the keyboard (eg. S,D,F,G,H,J,K,L to assign eight settings to one parameter). The digitize screen shows only the plain picture, and completely lacks any simple OSD menues.

Quick Help

To see the images saved on the disc in a slideshow:

• Type RUN"ARA
• Press "V"
• Press SPACE

The enter the digitize mode:

• Type RUN"ARA
• Press "E" to "enter the program"
• Press "D" to "digitize"

Boot Menu

To get here, type RUN"ARA - available options are then:

 L = ? (shows a blank black screen)
 P = ? (shows a blank black screen)
 V = Slideshow Prompt (allows to get to the slideshow)
 E = Main Menu (allows to get to digitize mode)

Slideshow Prompt

To get here, press "V" in Boot Menu - available options are then:

 SPACE = Enter the actual slideshow
 ENTER = Go to main menu

Main Menu

To get here, press "E" in Boot menu (or ENTER at Slideshow Prompt). Available options are then... well, they are strange: The cuisine related words, entree, hor's d'oeuvres, specialies du chef, and dessert are jokes - ignore them. The actual options are:

 D = Digitize
 P = Paint (allows to edit colour scheme)
 L = Load image from disc
 S = Save image to disc
 C = Catalogue of disc
 I = Insert image from file
 H = Hardcopy (print image)

Digitize Menu

To get here, Type RUN"ARA, then press "E", then press "D". Digitize mode doesn't display any OSD menues or OSD help, so it's hard to use without manual (or without disassembling the code). Available options are:

 COPY      = Apply current image (for later saving to disc)
 ENTER     = Back to Main Menu (the COPY'ied image can be SAVED from there)
 ^         = Autoscan on (displays incoming data "animated" picture stream)
 SPACE     = Autoscan off (useful only if you have a second screen, eg. TV set)
 U         = Undo last capture (when U pressed twice: restore last capture)
 @         = Toggle video mode (320x200x4, or 160x200x16)
 UP/DN     = Vertical picture position (+/- 1 step) (fine adjust)
 LT/RT     = Vertical picture position (+/- 3 steps) (coarse adjust)
 123456789 = Brightness (1=lower, 9=higher)
 SDFGHJKL  = Dithering (S=lower=no dithering, L=higher)
 ERTY      = Contrast (E=lower, Y=higher)

Technical

The hardware consists of an A/D converter, and bunch of logic chips. It does also includes two 8K SRAM chips, used as 16K capture buffer (the image is captured to that buffer in realtime, and can then be read by software at slower speed).

The device connects to SCART connector on TV Set (or Video Recorder or other picture source). There seem to be no attempts to decode SECAM color informations, ie. only luminance (brightness) seems to be supported. Luminance should be same in all countries, so it should also work with PAL/NTSC.

Two capture formats are supported: 320x200x4 and 160x200x16. Of which, in practice, the software supports only max 8 colors, not 16 colors (nethertheless, the actual hardware might, or might not support 16 colors, and it's just the software ignoring their LSBs; the CPC's 27-color palette isn't suitable for displaying 16 "grayscales").

I/O Port Summary

 F8F5h - R - read sync signal (bit0)
 F9F5h - W - reset 10bit config value to zero (write once to set config=0)
 FAF5h - W - increment 10bit config value (write N times to set config=N)
 FAF5h - R - read capture data (after capture was invoked and completed)
 FBF5h - W - invoke capture

The three write-able ports are using a "write-strobe" mechanism (according to the disassembled software, the data written to the ports is don't care).

10bit Config Value

The Z80's 8bit databus doesn't allow to write 10bit values. The ARA is using a rather strange solution to overcome that problem. The mechanism to set Config=N is:

 OUT [F9F5h],garbage, FOR I=1 to N, OUT [FAF5h],garbage, NEXT I
 Whereas, the separate bits in "N" are:
 0-1  Contrast
 2-5  Brightness
 6    Mode (0=320x200x4, 1=160x200x16)
 7-9  Dither

Dotclock

The dotclock (horizontal resolution) is unknown. For a CPC-like aspect ratio, it should be 4MHz (for 320 pixel resolution), which could be obtained from expansion port. However, the digitizer includes it's own crystal (the photo isn't clear there, it looks like 5MHz or 6MHz) (but more probably it's something like 16MHz, the leading "1" being invisible on the photo, 16MHz would be reasonable for splitting a 4MHz dotclock into 4 steps).

Pictures

• 

  Digitaliseur Ara

• 

  Screenshot (boot menu)

• 

  Screenshot (example)

• 

  Screenshot (paint function)

• 

  Upper board, top-view

• 

  Lower board, bottom-view

• 

  Side view (from top)

• 

  Side view (connector)

• 

  Upper board

• 

  Spot on lower board

Download

Original driver disc, with ARA.BIN software and including 20 sample images. The images are possibly not the original images shipped with the hardware: they are showing people making love (and they do not omit details). Anyways, they were obviously digitized with the original hardware, and so, they are useful to show the average picture quality of the digitizer hardware, the (slightly uncommon) file format of the images, and to demonstrate the slideshow feature in the ARA software.

• Media:ARA Digitaliseur Video Disc.zip (dsk)