Difference between revisions of "MM12"
(→Pictures) |
(→Pictures) |
||
| Line 35: | Line 35: | ||
Image:MM12_side.jpg|MM12 side (showing one of the speakers) | Image:MM12_side.jpg|MM12 side (showing one of the speakers) | ||
Image:MM12_back_info.jpg|MM12 back (showing information plate) | Image:MM12_back_info.jpg|MM12 back (showing information plate) | ||
| + | Image:MM12_front_dials.jpg|MM12 front (showing dials and power. Monitor is on it's side) | ||
</gallery> | </gallery> | ||
Revision as of 13:49, 30 March 2010
This was the amber monochrome monitor sold together with the CPC464plus/CPC6128plus computers. It was also available as an option to the GX4000 video console.
As the disk drive of the CPC6128plus didn't needed 12V anymore, the monitor provided a 5V power supply only. Unlike the precedessors GT64/GT65 it also had built-in stereo speakers and thus a different connector for the signals. It can therefore not be used for the classic CPCs without adaptor cable.
Technical Specs.
| Tube diameter: | 30.5cm/12" |
| Visible diameter: | ??cm/??" |
| Input voltage: | 220V~/50Hz |
| Power consumption: | 42W / 0.22A |
| Output voltage: | 5V 2.4A |
Pictures
MM12 front
MM12 back (showing vhold dial)
MM12 side (showing one of the speakers)
MM12 back (showing information plate)
MM12 front (showing dials and power. Monitor is on it's side)
Weblinks
Notes
Not to be confused with the Schneider monitor with the same model name, as that one was the Hercules Monochrome monitor for the Schneider EuroPC and similar!
Manual
The procedure of setting up the CPCplus/GX4000 with the MM12 monitor is described in the CPC464plus/CPC6128plus and GX4000 User Manual.
