Difference between revisions of "Connector:Printer port"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Classic CPC Pinout) |
(→Classic CPC Pinout) |
||
Line 36: | Line 36: | ||
|- | |- | ||
| 16 || GND || | | 16 || GND || | ||
+ | |- | ||
+ | | 17 || NC || | ||
+ | |- | ||
+ | | (18)|| NC || | ||
|- | |- | ||
|19..26|| GND || GND | |19..26|| GND || GND | ||
Line 45: | Line 49: | ||
|29..30|| NC || GND | |29..30|| NC || GND | ||
|- | |- | ||
− | | 31 | + | | 31 || NC || /Init |
|- | |- | ||
− | | 32 | + | | 32 || NC || /Error |
|- | |- | ||
− | | 33 | + | | 33 || GND || |
|- | |- | ||
− | | 34 | + | | 34 || NC || |
|- | |- | ||
− | | 35 | + | | 35 || NC || |
|- | |- | ||
− | | 36 | + | | (36) || NC || /Select |
|- | |- | ||
|} | |} |
Revision as of 22:15, 28 January 2010
Classic CPC Pinout
Pin No. | CPC | PC / Centronics |
1 | /Strobe | /Strobe |
2 | Data 0 | Data 0 |
3 | Data 1 | Data 1 |
4 | Data 2 | Data 2 |
5 | Data 3 | Data 3 |
6 | Data 4 | Data 4 |
7 | Data 5 | Data 5 |
8 | Data 6 | Data 6 |
9 | GND | Data 7 |
10 | NC | /Ack |
11 | Busy | Busy |
12 | NC | PaperEnd |
13 | NC | SLCT |
14 | GND | /AutoLF |
15 | NC | |
16 | GND | |
17 | NC | |
(18) | NC | |
19..26 | GND | GND |
27 | NC | GND |
28 | GND | GND |
29..30 | NC | GND |
31 | NC | /Init |
32 | NC | /Error |
33 | GND | |
34 | NC | |
35 | NC | |
(36) | NC | /Select |
There is no pin 18 to get a centronics-compatible pin numbering. Ie. although the CPC uses a 34pin edge connector, the pins are numbered as on a 36pin centronics connector.
As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see 8bit Printer Ports.
CPC Plus and KC Compact Pinout
Pin No. | CPC+ | KC Compact | PC |
1 | /Strobe | /Strobe | /Strobe |
2 | Data 0 | Data 0 | Data 0 |
3 | Data 1 | Data 1 | Data 1 |
4 | Data 2 | Data 2 | Data 2 |
5 | Data 3 | Data 3 | Data 3 |
6 | Data 4 | Data 4 | Data 4 |
7 | Data 5 | Data 5 | Data 5 |
8 | Data 6 | Data 6 | Data 6 |
9 | Data 7 | Data 7 | Data 7 |
10 | NC | NC | /Ack |
11 | Busy | Busy | Busy |
12 | NC | NC | PaperEnd |
13 | NC | NC | SLCT |
14 | NC | NC | /AutoLF |
15 | NC | NC | /Error |
16 | +5V | NC | /Init |
17 | GND | NC | /Select |
18-25 | GND | GND | GND |
CPC+ and KC Compact printer ports differ only on Pin 16,17.