Difference between revisions of "Vortex Disc Drives"

Revision as of 10:16, 26 May 2022

A series of external 3.5" and 5.25" floppy disc drives from Vortex providing up to 720K capacity (704K available). The Vortex drives were most popular in Germany.

S- and D-Drives (720K)

These are the very first generation of 720K floppy disc drives from Vortex. They came in variants having either a single drive ("S" variant) or two drives ("D" variant). The 5,25" drives used were BASF 6138 type drives (double-sided, double density, 80 tracks).

• Vortex Floppy Disk Station F1 für den Schneider CPC 464 - Benutzerhandbuch (manual)

Variants

• F1 - S Single 5.25" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
• F1 - D Double 5.25" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
• M1 - S Single 3.5" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
• M1 - D Double 3.5" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11

• 

  Vortex F1-D with CPC 6128 Interface

• 

  An anonymous box housing the controller board

• 

  Look inside the controller, a NEC 765 chip and VDOS upgraded to v2.0

• 

  Controller with mounted VDOS chip

• 

  F1-D Interface (CPC 664)

• 

  F1-D Interface Board (CPC 664)

• 

  F1-D Interface Board (CPC 664)

• 

  F1-D Interface Board (CPC 6128)

Second Drive Upgrade

Vortex offered an upgrade option that allowed an F1/M1-S single drive to be upgraded to an F1/M1-D dual drive. To do this, one simply had to install an additional drive in the free drive slot of the S-drive housing.

FDA-1 3" Drive Adapter

This adapter allows to use an Amstrad 3" drive on Vortex F1/M1 setups connected to a CPC 464. Since only two drives can be used simultaneously, the 3" drive had to be manually selected first using RSX commands.

• 3" Adapter zur VORTEX-Diskettenstation (manual)

• 

  Adapter to connect an additional 3" disc drive in between a CPC 464 and a F1/M1

• 

  Inside the adapter box

• 

  Inside the adapter box (closeup)

FDC I/O Ports

All types of floppy disk controllers for the F1-S/F1-D/M1-S/M1-D range are based on the NEC 765 chip. The manual states that on "controllers having an integrated ROM module/eprommer" (probably the later 6128 interfaces?), the port addresses can be freely configured using a decoder ROM.

CPC 464:

CPC 664/6128:

Z-Drives (180K)

These are basic and less expensive low-capacity drives and were meant to be directly connected as B drive to a CPC 464 with DDI-1 or a CPC 664/6128. Since these drives do not ship with an own controller or a VDOS ROM, they do rely fully on AMSDOS and thus only 40 tracks can be accessed.

Variants

• F1 - Z Single 5.25" drive with power supply with ribbon cable (does not come with interface containing FDC or VDOS)
• M1 - Z Single 3.5" drive with power supply with ribbon cable (does not come with interface containing FDC or VDOS)

X-Drives (720K)

These are the latest drives from Vortex for use with a CPC 464 with DDI-1 or a CPC 664/6128 (ie. on systems that already have a floppy disc controller); no additional controller was required anymore. Instead, a ROM module was supplied together with the drive, which provided VDOS 2.0-X. Only single-drive variants were available. The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as X-DDOS from Dobbertin). These drives are very well designed and have solved many of the problems of the earlier series, especially in terms of compatibility.

• Vortex X-Laufwerke (manual)
• Manual de las Unidades Vortex (manual)
• NEC drive inside Vortex M1-X NEC drive inside Vortex M1-X

Variants

• F1 - X Single 80 track, Double Sided, 5.25" drive with power supply
• M1 - X Single 80 Track, Double Sided, 3.5" drive with power supply
• F1 - XRS same as F1-X, upgraded with RS232-C interface
• M1 - XRS same as M1-X, upgraded with RS232-C interface

• 

  F1-X (CPC 664)

• 

  F1-X (CPC 664) backside

• 

  F1-X (CPC 664) backside, showing edge connector

• 

  F1-X (CPC 664) inside view

• 

  F1-X/M1-X manual and utility disk

• 

  M1-X (CPC 464)

• 

  M1-X (CPC 464) backside

• 

  M1-X (CPC 464) backside, showing IDC connector

• 

  M1-X (CPC 464) underside

• 

  M1-X (CPC 464) inside view, showing the drive and power

• 

  M1-X (CPC 464) inside view, close-up of the drive from above

• 

  M1-X (CPC 464) inside view, close-up from the backside

X(RS)-Modul

The X-drives for the CPC 664/6128 are connected directly to the floppy port. To provide VDOS, the "X-Modul" had to be installed to the expansion port. This is a single-ROM board containing a VDOS 2.0-X ROM and was also available with an additional RS232-C interface (named "XRS-Modul"). The board supplied for the CPC 464 version came with a chunky housing in which both the "X(RS)-Modul" and the DDI-1 had to be installed.

• 

  X(RS)-Modul (CPC 464)

• 

  X(RS)-Modul with built-in DDI-1 visible (CPC 464)

• 

  XRS-Modul board beneath the DDI-1 (CPC 464)

• 

  X-Modul (CPC 6128)

• 

  X-Modul (CPC 6128) board

RS232 I/O Ports

The RS232-C interface of the "XRS-Modul" was advertised to be compatible with Amstrad/Pace interfaces, but offers only one channel (so no channel B).

• Vortex RS232-C Manual (pdf)

VDOS

See VDOS

• Benutzerhandbuch für das Diskettenbetriebssystem VDOS 2.0 (VDOS 2.0 user manual)

Vortex Disk Format

See VDOS: Vortex Disc Format