Difference between revisions of "Vortex Disc Drives"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(→‎Vortex -X Drives (720K/disk))
(→‎Vortex Disk Format)
Line 69: Line 69:
 
== Vortex Disk Format ==
 
== Vortex Disk Format ==
  
−
Sector numbers are 01h..09h (same as AMSDOS IBM Format, but with a 9th sector).
+
See [[VDOS]]
−
Disks are Double-Sided, Double Density, 80 Tracks, 9 Sectors, blocks are allocated in 4K units.
+
−
Total capacity is 720K (704K available):
+
−
* First 9K contain two System Tracks (eg. CP/M Bootstrap)
+
−
* Next 4K contain directory (see Note)
+
−
* Next 704K are data (allocated in 4K blocks) (aka 4K clusters)
+
−
* Last 3K are unused (due to 4K allocation size)
+
−
Note: According to the manual, the directory can hold 128 entries under VDOS2.0 (whole 4K used), but only 64 entries under VDOS1.0 (only half of the 4K area used).
+
  
 
The Vortex -Z drives do not seem to include any [[VDOS]] ROM (so they do support only normal 40-Track AMSDOS Formats, but NOT the 80-Track Vortex format).
 
The Vortex -Z drives do not seem to include any [[VDOS]] ROM (so they do support only normal 40-Track AMSDOS Formats, but NOT the 80-Track Vortex format).

Revision as of 06:34, 27 January 2018

Disc drives from Vortex, with 80 tracks and 720K capacity (704K available).

Vortex -S and -D Drives (720K/disk)

  • F1 - S Single 5.25" drive with NEC765, with VDOS 1.0
  • F1 - D Double 5.25" drive with NEC765, with VDOS 1.0
  • M1 - S Single 3.5" drive with NEC765, with VDOS 1.0
  • M1 - D Double 3.5" drive with NEC765, with VDOS 1.0

These are the original drives from Vortex, for use on CPC 464. The hardware supports one or two 80 track drives, additionally a 3" FD-1 can be connected as third drive, ie. unlike most other CPC disk interfaces it supports more than 2 drives. VDOS only stores information for 2 drives at one time.

TO BE CONFIRMED: Does the interface fully decode US0/US1 from NEC765 and if you select unit 3 which drive is accessed.

Vortex -Z Drives (180K/side or 180K/disk?)

  • F1 - Z Single 5.25" drive without FDC, without VDOS
  • M1 - Z Single 3.5" drive without FDC, without VDOS

These are the Low-Capacity drives from Vortex, for use on CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already have a FDC and AMSDOS). There doesn't seem to be anything special about this product, just an off-the-shelf disk drive, shipped with a CPC-specific connection cable.

AMSDOS can only access 40 tracks. TO BE CONFIRMED: Are the drives 80 track, double sided? Is there any way to access the second side with AMSDOS (e.g. side switch??)

Vortex -X Drives (720K/disk)

  • F1 - X Single 5.25" drive without FDC, with VDOS 2.0
  • M1 - X Single 3.5" drive without FDC, with VDOS 2.0
  • F1 - XRS same as F1-X, upgraded with RS232 interface
  • M1 - XRS same as M1-X, upgraded with RS232 interface

These are the newest drives from Vortex, for use on CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already have a FDC). The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as X-DDOS from Dobbertin)

Vortex Add-ons

  • Vortex X modul (adding RS232 support to -X drives)
  • VDOS2.0 (upgrading older drives to VDOS 2.0)
  • Second drive unit (for upgrading a single -S drive to a dual -D drive)

I/O Ports

 Standard Addresses (same as used by AMSDOS):
   FB7Eh 765 FDC (internal) Status Register (R)
   FB7Fh 765 FDC (internal) Data Register (R/W)
   FA7Eh Floppy Motor On/Off Flipflop
 Special Addresses (secondary FDC):
   FBF6h 765 FDC (Vortex,ext) Status Register (Read)
   FBF7h 765 FDC (Vortex,ext) Data Register (R/W)
   FA7Eh Floppy Motor On/Off Flipflop (same as normal)
 (The Special addresses are mentioned in the manual
 for the Vortex -X drives) (but apparently they are referring
 to other/older Vortex drives, not the -X drives)

The Special addresses are used only on CPC 664/6128 and only if the Vortex drive includes an FDC chip.

The X drive has a different PCB than the PCB for the S, the manual describes connecting the DDI-1 interface to the X drive interface and a 'decoder-ROM' which defines the I/O decoding?


  • Note1: The -Z and -X drives do not include FDC chips.
  • Note2: The -S and -D drives do reportedly work only on CPC 464 (?).

So, not sure if/when the Special addresses are used at all? 

 RS232 Ports (for -X drives with RS232)
   FADC/FADD=Serial Data/Control
   FBDC/FBDD/FBDF=Counter 0/1/Mode.
 So it's probably compatible with Amstrad/Pace 
 (and probably also including, but not using,
 Channel B Ports FADE/FADF and FBDE).

Vortex Disk Format

See VDOS

The Vortex -Z drives do not seem to include any VDOS ROM (so they do support only normal 40-Track AMSDOS Formats, but NOT the 80-Track Vortex format).

Pictures

  • The Vortex F1 Drives

  • F1-Z Disc Drive

  • F1-D Disc Drive

  • Vortex Disc Drive Interface (for -S or -D drives)

  • A anonymous box houses the controller

  • Look inside the controller, with 765 chip, and VDOS (upgraded to v2.0)

  • Controller with VDOS mounted

  • Vortex Disc Drive Interface (for -X drives)

  • Newer -X drive interface without 765

  • Newer -X drive interface without 765, plus RS232

Manuals

Retrieved from "https://gryzor.info/index.php?title=Vortex_Disc_Drives&oldid=100713"