Difference between revisions of "SYMBiFACE II:RAM Expansion"
(Created page with "The RAM selection is made by writing a byte (with bit 7 and 6 set to 1) to port 7fxx. The Symbiface 2 decodes the upper 8-bits of the I/O port completely and responds to 01111...") |
|||
| (4 intermediate revisions by one other user not shown) | |||
| Line 7: | Line 7: | ||
On a 6128 or 6128Plus with internal memory expansion, "C3" works as expected. The PAL inside the 6128 performs the remapping of &c000 to &4000. | On a 6128 or 6128Plus with internal memory expansion, "C3" works as expected. The PAL inside the 6128 performs the remapping of &c000 to &4000. | ||
| − | &0000-&3fff: Main ram &0000-&3fff | + | &0000-&3fff: Main ram &0000-&3fff |
| − | &4000-&7fff: Main ram &c000-&ffff | + | &4000-&7fff: Main ram &c000-&ffff |
| − | &8000-&bfff: Main ram &8000-&bfff | + | &8000-&bfff: Main ram &8000-&bfff |
| − | &c000-&ffff: Extra ram page (same ram page selected with 'C7') | + | &c000-&ffff: Extra ram page (same ram page selected with 'C7') |
On a 464/664/464Plus the result is different because it doesn't have the PAL memory mapping IC (in the case of 464Plus or Costdown 464 the PAL is not activated). | On a 464/664/464Plus the result is different because it doesn't have the PAL memory mapping IC (in the case of 464Plus or Costdown 464 the PAL is not activated). | ||
| − | &0000-&3fff: Main ram &0000-&3fff | + | &0000-&3fff: Main ram &0000-&3fff |
| − | &4000-&7fff: Main ram &4000-&7fff | + | &4000-&7fff: Main ram &4000-&7fff |
| − | &8000-&bfff: Main ram &8000-&bfff | + | &8000-&bfff: Main ram &8000-&bfff |
| − | &c000-&ffff: Extra ram page (same ram page selected with 'C7') | + | &c000-&ffff: Extra ram page (same ram page selected with 'C7') |
| − | C3 looks the same as C1. On fully compatible Dk'tronics ram expansions, A15 is forced to 1 to remap &c000-&4000 but the Symbiface 2 doesn't do this so this is why it works differently on a 464 compared to a 6128. | + | C3 therefore looks the same as C1. On fully compatible Dk'tronics ram expansions, A15 is forced to 1 to remap &c000-&4000 but the Symbiface 2 doesn't do this so this is why it works differently on a 464 compared to a 6128. |
| + | |||
| + | [[Category:Hardware]] | ||
| + | [[Category:Memory expansions]] | ||
Latest revision as of 10:55, 14 July 2018
The RAM selection is made by writing a byte (with bit 7 and 6 set to 1) to port 7fxx. The Symbiface 2 decodes the upper 8-bits of the I/O port completely and responds to 01111111xxxxxxxx. It accepts all RAM selections from c0-ff to access a full 512KB of extra RAM.
All selections except "c3" (RAM selection & 7 = 3) work as expected.
On a 6128 or 6128Plus with internal memory expansion, "C3" works as expected. The PAL inside the 6128 performs the remapping of &c000 to &4000.
&0000-&3fff: Main ram &0000-&3fff &4000-&7fff: Main ram &c000-&ffff &8000-&bfff: Main ram &8000-&bfff &c000-&ffff: Extra ram page (same ram page selected with 'C7')
On a 464/664/464Plus the result is different because it doesn't have the PAL memory mapping IC (in the case of 464Plus or Costdown 464 the PAL is not activated).
&0000-&3fff: Main ram &0000-&3fff &4000-&7fff: Main ram &4000-&7fff &8000-&bfff: Main ram &8000-&bfff &c000-&ffff: Extra ram page (same ram page selected with 'C7')
C3 therefore looks the same as C1. On fully compatible Dk'tronics ram expansions, A15 is forced to 1 to remap &c000-&4000 but the Symbiface 2 doesn't do this so this is why it works differently on a 464 compared to a 6128.
