Difference between revisions of "Vortex Disc Drives"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(→‎F1-S and F1-D (5,25"))
 
(353 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
A series of 3.5" and 5.25" floppy disc drives from [[Vortex_Computersysteme|Vortex]] providing up to 720K capacity (704K available).
+
A series of external 3,5" and 5,25" floppy disc drives from [[Vortex_Computersysteme|Vortex]] providing up to 720K capacity (704K available). The Vortex drives were most popular in Germany. For more information regarding [[VDOS]] and the Vortex Disk Format, see the dedicated [[VDOS]] Wiki page.
  
−
== S- and D-Drives (720K/disk) ==
+
== S- and D-Drives (720K) ==
  
−
These are the first generation of floppy disc drives from Vortex. They came in variants having either a single ("S" variant) or two ("D" variant) 80-track drives (BASF 6138). Additionally, a 3" [[Amstrad Disk Drive|FD-1]] can be connected as third drive, ie. unlike most other CPC disk interfaces it supports more than 2 drives. With [[VDOS]] only two drives are accessible at one time. The drives interfacing with their own FDC can be used with the CPC 6128 to use different I/O ports (see below).
+
These are the first generation of 720K floppy disc drives from Vortex. They came in variants having either a single drive ("S" variant) or two drives ("D" variant). The "S" variant (as well as the less expensive "Z" variant) was delivered with the same double-height casing as the "D" variant, so that a second drive could be retrofitted.
  
−
=== Variants ===
+
The F1-S, F1-D, M1-S, M1-D drives have their own FDC765 in the controller, and this one supports all DS0 up to DS3. The Vortex interface can manage 4 floppy drives in total.
  
−
* '''F1 - S''' Single 5.25" drive with power supply connected via ribbon cable to interface with [[FDC|NEC765]] and [[VDOS]] 1.0 or 2.11
+
=== F1-S and F1-D (5,25") ===
−
* '''F1 - D''' Double 5.25" drive with power supply connected via ribbon cable to interface with [[FDC|NEC765]] and [[VDOS]] 1.0 or 2.11
+
 
−
* '''M1 - S''' Single 3.5" drive with power supply connected via ribbon cable to interface with [[FDC|NEC765]] and [[VDOS]] 1.0 or 2.11
+
The F1-S and F1-D models are based on BASF 6138 (81690-001) type 5,25" disk drives, i.e. double-sided, 80 tracks per side, 96 tpi density.
−
* '''M1 - D''' Double 3.5" drive with power supply connected via ribbon cable to interface with [[FDC|NEC765]] and [[VDOS]] 1.0 or 2.11
+
−
<br />
+
  
 
<gallery>
 
<gallery>
−
Image:FD1.jpg|Vortex F1-D with CPC 6128 Interface
+
Image:IMG 3163.JPG|F1-D
−
Image:vortex controler 1.jpg|An anonymous box housing the controller board
+
Image:Vortex f1d front.jpg|F1-D front view
−
Image:vortex controler 2.jpg|Look inside the controller, a NEC 765 chip and [[VDOS]] upgraded to v2.0
+
Image:Vortex f1d back.jpg|F1-D backside
−
Image:vortex controler 3.jpg|Controller with mounted [[VDOS]] chip
+
 
</gallery>
 
</gallery>
 
<gallery>
 
<gallery>
−
Image:Vortex fd-1 interface 664.jpg|F1-D Interface (CPC 664)
+
Image:Vortex fd-1 interface 664.jpg|F1-D interface<br />(CPC 664)
−
Image:Fd1 interface 664 platine front.jpg|F1-D Interface Board (CPC 664)
+
Image:Fd1 interface 664 platine front.jpg|F1-D interface board (CPC 664)
−
Image:Fd1 interface 664 platine back.jpg|F1-D Interface Board (CPC 664)
+
Image:Fd1 interface 664 platine back.jpg|F1-D interface board (CPC 664)
 +
Image:F1DCONT.jpg|F1-D interface board (CPC 6128)
 
</gallery>
 
</gallery>
 
<gallery>
 
<gallery>
−
Image:F1DCONT.jpg|F1-D Interface Board (CPC 6128)
+
Image:Vortex f1 manual.jpg|F1-S/D manual
 +
Image:Vortex F1 SystemDisk 464.jpg|F1-S/D system disk<br />(CPC 464)
 +
Image:Vortex f1 manual disk.jpg|F1-S/D system disk<br />(CPC 664/6128)
 
</gallery>
 
</gallery>
  
−
=== Second drive upgrade ===
+
The floppy controller of the F1-D / F1-S was cloned by Hans Hübner of FutureSoft with MX4 connector and without ROM slot. It supports four drives. Under FutureOS they are named E-H.
  
−
An upgrade was available which allowed to upgrade a single -S drive to a dual -D drive.
+
=== A1-S Upgrade Kit (5,25") ===
  
−
=== FD-1 drive adapter ===
+
Vortex offered an upgrade kit consisting of a single bare drive and an installation manual, allowing to upgrade a F1-S (single) drive to a F1-D (dual) drive. To do this, one simply had to install the additional drive in the free slot of the drive case.
  
−
The Vortex S- and D-drives were originally intended as upgrades to CPC 464 setups already having a DDI-1/FD-1. This adapter allowed to continue using the 3" drive. Since only two drives can be used simultaneously, the drive had to be selected manually using a RSX command.
+
<gallery>
−
<br />
+
Image:Basf 6138 spare drive.jpg|BASF 6138 spare drive
 +
</gallery>
 +
 
 +
=== M1-S and M1-D (3,5") ===
 +
 
 +
The M1-S and M1-D models are based on 3,5" disk drives. Controller and DOS were identical for 5,25" and 3,5" devices.
 +
 
 +
=== FDA-1 3" Drive Adapter ===
 +
 
 +
This adapter allows to connect an external FD-1 3" drive on Vortex F1/M1 setups on the CPC 464. Since only two drives can be used at the same time, the external 3" drive first had to be selected manually with the RSX command '''|S'''. This RSX command worked also with VDOS 2.11 on CPC6128.
 +
 
 +
{| class="wikitable"
 +
|-
 +
! RSX !! Description
 +
|-
 +
| &#124;S,1 || Use 3" drive as drive A, upper Vortex drive is disabled
 +
|-
 +
| &#124;S,2 || Use 3" drive as drive B, lower Vortex drive is disabled
 +
|-
 +
| &#124;S,0 || Disable the 3" drive (default)
 +
|}
  
 
<gallery>
 
<gallery>
−
Image:Vortex 3rd drive adapter.jpg|Adapter to connect an additional 3" disc drive in between a CPC 464 and a F1-D
+
Image:Vortex 3rd drive adapter.jpg|FDA-1 Adapter
 
Image:Vortex 3rd drive adapter insides.jpg|Inside the adapter box
 
Image:Vortex 3rd drive adapter insides.jpg|Inside the adapter box
 
Image:Vortex 3rd drive adapter insides closeup.jpg|Inside the adapter box (closeup)
 
Image:Vortex 3rd drive adapter insides closeup.jpg|Inside the adapter box (closeup)
 +
Image:Vortex 3rd drive adapter plug cable.jpg|Plug (cable side)
 +
Image:Vortex 3rd drive adapter plug floppy.jpg|FD-1 3" floppy drive plug
 
</gallery>
 
</gallery>
  
−
== Z-Drives (180K/side) ==
+
=== Clone of the F1-D controller ===
 +
A clone of the F1-D controller was created by [[Hans Hübner]] of [[FutureSoft]] in 2024. The card fits on the Mother X4 board and doesn't contain an extra ROM slot. Using [[FutureOS]] this card allows to add four additional floppy disc drives to the CPC, being called E, F, G and H.
  
−
These are basic and less expensive ''low-capacity'' drives and were meant to be directly connected to a CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already provide a floppy controller). Since these drives do not ship with a special controller, they do rely fully on AMSDOS and thus only 40 tracks can be accessed.
+
=== FDC I/O Ports ===
  
−
=== Variants ===
+
All types of floppy disk controllers for the F1-S/D and M1-S/D series are based on the NEC 765 chip. The manual states that on "controllers having an integrated ROM module/eprommer" (probably the later 6128 interfaces?), the port addresses can be freely configured using a decoder ROM.
 +
 
 +
'''CPC 464:'''
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Address !! Description
 +
|-
 +
| 0xFB7E || uPD control
 +
|-
 +
| 0xFB7F || uPD data
 +
|-
 +
| 0xFA7E || motor on/off
 +
|}
 +
 
 +
'''CPC 664/6128:'''
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Address !! Description
 +
|-
 +
| 0xFBF6 || uPD control
 +
|-
 +
| 0xFBF7 || uPD data
 +
|-
 +
| 0xFA7E || motor on/off
 +
|}
 +
 
 +
=== Downloads ===
 +
 
 +
* [[Media:Vortex Floppy Disk Station F1 für den Schneider CPC 464 - Benutzerhandbuch.pdf|Benutzerhandbuch für die Vortex Floppy Disk Station F1 für den Schneider CPC 464]] {{DE}} (Vortex F1 user manual)
 +
* [[Media:Vortex_Vdos_2.0_Manual.pdf|Benutzerhandbuch für das Diskettenbetriebssystem VDOS 2.0]] {{DE}} (VDOS 2.0 user manual)
 +
* [[Media:3-Zoll-Adapter zur VORTEX-Diskettenstation.pdf|Benutzerhandbuch für den FDA-1 3"-Adapter]] {{DE}} (3" adapter user manual)
 +
* [[Media:VTXF1464.DSK|Vortex F1-S/D Systemdiskette für CPC 464]] (system disk, 720k image, bootable)
 +
* [[Media:VORTF1.DSK|Vortex F1-S/D Systemdiskette für CPC 664/6128]] (system disk, 720k image)
 +
* [[Media:Vortex10.zip|VDOS 1.0 ROM]] {{DE}}
 +
* [[Media:Vortex20.zip|VDOS 2.0 ROM]] {{DE}}
 +
* [[Media:80307-058 BASF 6138 Mini Disk Apr83.zip|BASF 6138 Datasheet (F1-S/D/Z Floppy Disk Drive)]]
  
−
* '''F1 - Z''' Single 5.25" drive with power supply with ribbon cable (does not come with interface containing FDC or [[VDOS]])
 
−
* '''M1 - Z''' Single 3.5" drive with power supply with ribbon cable (does not come with interface containing FDC or [[VDOS]])
 
 
<br />
 
<br />
 +
 +
== Z-Drives (180K/side) ==
 +
 +
These are less expensive drives and were meant to be directly connected as B drive to a CPC 464 with DDI-1 or a CPC 664/6128. Since these drives ship neither with an own controller nor a [[VDOS]] ROM, they do rely fully on AMSDOS and thus only 40 tracks on one side can be accessed, resulting in the same capacity (180K/side) as the 3" drives.
 +
 +
=== F1-Z (5,25") ===
 +
 +
The F1-Z model is based on a later revision of the BASF 6138 type disk drive (81757-001), which offers more configuration options using jumpers.  The drive was shipped in a "double step" configuration to use only 40 tracks, and thus the cheaper and more widely available DS DD floppy disks (48 tpi, 180K/side) could be used.
  
 
<gallery>
 
<gallery>
−
Image:F1-x.jpg|Vortex F1-Z
+
Image:Basf 6138 81757 001.jpg|BASF AG 6138 (81757-001) drive
 +
Image:Basf 6138 81757 001 jumpers.jpg|BASF AG 6138 (81757-001) 40 track jumper configuration
 
</gallery>
 
</gallery>
  
−
== X-Drives (720K/disk) ==
+
=== A1-Z Upgrade Kit (5,25") ===
  
−
These are the latest drives from Vortex for use on CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already have a FDC). Only single-drive variants were available. The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as [[X-DDOS]] from Dobbertin). These drives are well designed and strong. They are housed in a metal case with power supply (which has good protection with fuses) and have good quality drive mechanisms. The drive has jumpers on it that can be configured as needed.
+
Vortex offered an upgrade kit consisting of a controller, a manual, a CP/M license and an utility disk which allows a F1-Z drive to be upgraded to a F1-S drive.
  
−
=== Variants ===
+
=== M1-Z (3,5") ===
 +
 
 +
The M1-Z model is equipped with a single 3,5" disk drive.
  
−
* '''F1 - X''' Single 80 track, Double Sided, 5.25" drive with power supply and ribbon cable which connects to interface containing [[VDOS]] 2.0
 
−
* '''M1 - X''' Single 80 Track, Double Sided, 3.5" drive with power supply and ribbon cable which connects to interface containing [[VDOS]] 2.0
 
−
* '''F1 - XRS''' same as F1-X, upgraded with RS232 interface
 
−
* '''M1 - XRS''' same as M1-X, upgraded with RS232 interface
 
 
<br />
 
<br />
 +
 +
== X-Drives (720K) ==
 +
 +
These are the latest drives from Vortex for use with a CPC 464 with DDI-1 or a CPC 664/6128 (ie. on systems that already have a floppy disc controller); no additional controller was required anymore. Instead, a ROM module was supplied together with the drive, which provided VDOS 2.0-X. Only single-drive variants were available. The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as [[X-DDOS]] from Dobbertin).
 +
 +
=== F1-X and F1-XRS (5,25") ===
 +
 +
The F1-X model is based on either a single BASF 6138 (81690-001) or a single BASF 6139 5,25" disk drive. The BASF 6139 is a revisioned version which is slightly more compact (~1cm shorter), and also a number of electronical and mechanical design flaws that affected durability were corrected. The F1-XRS variant is equipped with an additional RS232-C interface.
  
 
<gallery>
 
<gallery>
−
File:Vortex-f1-x-full.jpg|Vortex F1-X with Manual and Driver Disk
+
File:F1-x front.jpg|F1-X
−
File:Vortex-f1-x-backside.jpg|Vortex F1-X Backside
+
File:Vortex f1-x cpc464 backside.jpg|F1-X backside, showing IDC connector (CPC 464)
 +
File:Vortex f1-x cpc664 backside edge.jpg|F1-X backside, showing edge connector (CPC 664)
 +
File:F1-x inside.jpg|F1-X inside view, showing a BASF 6139 drive
 +
File:F1x m1x manual.jpg|F1-X/M1-X manual and system utilities disk
 
</gallery>
 
</gallery>
 +
 +
=== M1-X and M1-XRS (3,5") ===
 +
 +
The M1-X model is based on a single NEC FD1035 type 3,5" disk drive. The M1-XRS variant is equipped with an additional RS232-C interface.
  
 
<gallery>
 
<gallery>
−
File:vortex-m1-x-front.png|Front of Vortex M1-X  
+
File:vortex-m1-x-front.png|M1-X
−
File:vortex-m1-x-under.png|Underneath the Vortex M1-X
+
File:vortex-m1-x-back.png|M1-X backside
−
File:vortex-m1-x-inside.png|Inside the Vortex M1-X showing the drive and power
+
File:vortex-m1-x-connector.png|M1-X backside, showing IDC connector (CPC 464)
−
File:vortex-m1-x-back.png|Back of Vortex M1-X showing connectors and power.
+
File:vortex-m1-x-under.png|M1-X underside
−
File:vortex-m1-x-connector.png|Back of Vortex M1-X showing IDC connection
+
File:vortex-m1-x-inside.png|M1-X inside view, showing the drive and power
−
File:vortex-m1-x-drive-close.png|Inside Vortex M1-X with a close up of the drive from above
+
File:vortex-m1-x-drive-close.png|M1-X inside view, close-up of the drive from above
−
File:vortex-m1-x-drive-details.png|Inside Vortex M1-X with a close up of the back of the drive
+
File:vortex-m1-x-drive-details.png|M1-X inside view, close-up from the backside
 
</gallery>
 
</gallery>
  
−
=== X-Modul (RS-232C Interface) ===
+
=== X(RS)-Modul ===
  
−
The "X-Modul" adds a RS-232C interface to -X drives. They are suspected to be at least partially compatible with Amstrad/Pace interfaces.
+
The X-drives for the CPC 664/6128 are connected directly to the floppy port. In order to provide [[VDOS]], the "X-Modul" (sometimes also called "VDOS module") must be connected additionally to the expansion port. This contains a ROM board that provides a VDOS 2.0-X ROM. The ROM board supplied for the CPC 464 came together with a chunky housing in which both the "X-Modul" and the DDI-1 controller were installed. All variants were also available with an additional RS232-C interface (in this case called either "XRS-Modul" or "X-Modul/RS").  
  
−
==== I/O Ports ====
+
<gallery>
 +
Image:Vortex fd1 464 controller 1.jpg|XRS-Modul (CPC 464)
 +
Image:Vortex fd1 464 controller 2.jpg|XRS-Modul with built-in DDI-1 visible (CPC 464)
 +
Image:Xrs 464.jpg|XRS-Modul board beneath the DDI-1 (CPC 464)
 +
Image:Vortex xrs 464 board backside.jpg|XRS-Modul board backside (CPC 464)
 +
</gallery>
 +
<gallery>
 +
Image:Vortex X-Modul 6128.jpg|X-Modul (CPC 6128)
 +
Image:Vortex X-Modul 6128 Board Front.jpg|X-Modul board (CPC 6128)
 +
Image:Vortex X-Modul 6128 Board Backside.jpg|X-Modul board backside (CPC 6128)
 +
</gallery>
 +
 
 +
=== RS232 I/O Ports ===
 +
 
 +
The RS232-C interface of the "XRS-Modul" was advertised to be compatible with Amstrad/Pace interfaces, but offers only one channel (so no channel B).
  
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
−
! Address !! Read !! Write
+
! Address !! Description
−
|-
+
−
| FADC || Channel A data || Channel A data
+
 
|-
 
|-
−
| FADD || Channel A control || Channel A control
+
| 0xFADC || SIO data (R/W)
 
|-
 
|-
−
| FADE || Channel B data || Channel B data
+
| 0xFADD || SIO control (R/W)
 
|-
 
|-
−
| FADF || Channel B control || Channel B control
+
| 0xFBDC || 8253 counter 0 (R/W)
 
|-
 
|-
−
| FBDC || Load counter 0 || Read counter 0
+
| 0xFBDD || 8253 counter 1 (R/W)
 
|-
 
|-
−
| FBDD || Load counter 1 || Read counter 1
+
| 0xFBDE || 8253 counter 2 (R/W)
 
|-
 
|-
−
| FBDE || Load counter 2 || Read counter 2
+
| 0xFBDF || Mode word (W)
−
|-
+
−
| FBDF || Write mode word || -
+
 
|}
 
|}
  
−
== Vortex Disk Format ==
+
=== Downloads ===
  
−
See [[VDOS]]
+
* [https://www.cpcwiki.eu/manuals/Vortex%20X-Laufwerke%20Manual.de.rar Benutzerhandbuch für die Vortex X-Laufwerke] {{DE}} (manual)
 +
* [[Media:Vortex RS232-C Manual.pdf|Benutzerhandbuch für die Vortex RS232-C Schnittstelle]] {{DE}} (RS232-C user manual)
 +
* [[Media:Manual de las Unidades Vortex.pdf|Manual de las Unidades Vortex]] {{ES}} (manual)
 +
* [[Media:VORTF1X.DSK|Systemdiskette für Vortex X-Laufwerke]] (system disk, 720k disk image, original)
 +
* [[Media:VTXF1XB.DSK|Systemdiskette für Vortex X-Laufwerke]] (system disk, 720k disk image, modified to boot CP/M 2.2)
 +
* [[Media:VDOS20X.ROM|VDOS 2.0-X ROM]] {{DE}} (German VDOS 2.0-X ROM for CPC 664/6128)
 +
* [[Media:NEC_FD1035_Floppy.pdf|NEC FD1035 Datasheet (M1-X Floppy Disk Drive)]]
  
−
== Drive Interface I/O Ports ==
+
<br />
  
−
'''Standard addresses (same as used by AMSDOS)'''
+
== Software Accessories ==
  
−
FB7Eh 765 FDC (internal) Status Register (R)
+
=== DOSCOPY ===
−
FB7Fh 765 FDC (internal) Data Register (R/W)
+
−
FA7Eh Floppy Motor On/Off Flipflop
+
  
−
'''Special addresses (secondary FDC)'''
+
DOSCOPY is a CP/M 2.2 utility which allows to read and write files from IBM and Atari ST formatted 5,25" disks. It was written in 1987 by Peter Höpfner.
  
−
The special addresses are mentioned in the manual for the Vortex -X drives, but apparently they are referring to other/older Vortex drives, not the -X drives. The special addresses are used only on CPC 664/6128 and only if the Vortex drive includes an FDC chip.
+
<gallery>
 +
Image:Vortex_DOSCOPY_Manual.JPG|DOSCOPY physical manual
 +
Image:Vortex_DOSCOPY_Disk.JPG|DOSCOPY 5,25" disk
 +
Image:Vortex_DOSCOPY_Screenshot.JPG|DOSCOPY screenshot
 +
</gallery>
  
−
FBF6h 765 FDC (Vortex,ext) Status Register (Read)
+
==== Downloads ====
−
FBF7h 765 FDC (Vortex,ext) Data Register (R/W)
+
−
FA7Eh Floppy Motor On/Off Flipflop (nearly same as normal, bit precise)
+
  
−
The X drive has a different PCB than the PCB for the S, the manual describes connecting the DDI-1 interface to the X drive interface and a 'decoder-ROM' which defines the I/O decoding?
+
* [[Media:DOSCOPY.DSK|DOSCOPY 1.1]] {{DE}} (Vortex 360k disk image)
 +
* [[Media:Vortex_DOSCOPY_Benutzerhandbuch.pdf|DOSCOPY 1.1 Benutzerhandbuch]] {{DE}} (manual)
  
−
* Note1: The -Z and -X drives do not include FDC chips.
+
=== PARA 3.0 ===
−
* Note2: The -S and -D drives do reportedly work only on CPC 464 (?).
+
  
−
So, not sure if/when the Special addresses are used at all?
+
PARA 3.0 is a CP/M 2.2 utility allowing to exchange files between the CPC and other CP/M based systems. It claims to support "reading, writing and formatting of 99% of all CP/M formats" and provides a comprehensive disk format analzer. It was written in 1987 by Peter Höpfner.
  
−
== Manuals ==
+
<gallery>
 +
Image:Vortex_PARA_3.0_Manual.JPG|PARA 3.0 physical manual
 +
Image:Vortex PARA 3.0 Disk.JPG|PARA 3.0 5,25" disk
 +
Image:Vortex PARA 3.0 Screenshot 1.JPG|PARA 3.0 loading screen
 +
</gallery>
  
−
* [[Media:Vortex Floppy Disk Station F1 für den Schneider CPC 464 - Benutzerhandbuch.pdf|Vortex Floppy Disk Station F1 für den Schneider CPC 464 - Benutzerhandbuch]] {{DE}} (Manual for old drives with VDOS 1.0)
+
==== Downloads ====
−
* [[Media:3-Zoll-Adapter zur VORTEX-Diskettenstation.pdf|3-Zoll-Adapter zur VORTEX-Diskettenstation]] {{DE}} (Manual for Vortex adapter for connecting a 3 inch floppy drive to the Vortex Disk Station F1 controller)
+
−
* [http://www.cpcwiki.eu/manuals/Vortex%20X-Laufwerke%20Manual.de.rar Vortex X-Laufwerke] {{DE}} (Manual for new X-drives with VDOS 2.0)
+
−
* [[Media:Vortex_Vdos_2.0_Manual.pdf|Vortex VDOS 2.0]] {{DE}} (Manual for upgrading from VDOS 1.0 to VDOS 2.0)
+
−
* [[Media:Manual de las Unidades Vortex.pdf|Manual de las Unidades Vortex]] {{ES}} (pdf)
+
−
* [[Media:Vortex RS232-C Manual.pdf|Vortex RS232-C Manual]] {{DE}} (pdf)
+
−
* [https://nfggames.com/X68000/Documentation/Floppy%20Drives/NEC/NEC%20FD1035%20Floppy.pdf NEC drive inside Vortex M1-X] NEC drive inside Vortex M1-X
+
  
 +
* [[Media:PARA30.DSK|PARA 3.0]] {{DE}} (Vortex 720k disk image)
 +
* [[Media:Vortex_PARA_3.0_Benutzerhandbuch.zip|PARA 3.0 Benutzerhandbuch]] {{DE}} (manual)
 +
 +
=== PARA 3.0 PLUS ===
 +
 +
PARA 3.0 PLUS (or PARA PLUS) is an enhanced distribution of PARA 3.0 which also integrates DOSCOPY 1.3 into a single software suite.
 +
 +
<gallery>
 +
Image:Para 30 plus intro.jpg|PARA 3.0+ loading screen
 +
Image:Para 30 plus mainmenu.jpg|PARA 3.0+ main menu
 +
Image:Para 30 plus analyzer.jpg|PARA 3.0+ format analyzer
 +
</gallery>
 +
 +
==== Downloads ====
 +
 +
* [[Media:PARAPLUS.DSK|PARA 3.0+]] {{DE}} (Vortex 720k disk image, bootable)
 +
 +
=== SPARA ===
 +
 +
SPARA was either the predecessor or a cut-down version of PARA 3.0 and was supplied with the F1-Z drives, only supporting 40 track formats.
 +
 +
=== FileCopy ===
 +
FileCopy 3.0 is a comprehensive tool to copy files with up to 16 different devices (using letters A to P), it supports the Vortex 704 KB format for 80 Track drives.
 +
 +
<br />
 +
 +
== 3rd Party Software ==
 +
 +
=== FutureOS ===
 +
 +
[[FutureOS]] has support for Vortex drives, it uses the Vortex 704 KB format for 80 Track drives.
 +
 +
=== ParaDOS ===
 +
 +
[[ParaDOS]] supports Vortex X-drives and can be used as a replacement for the VDOS-X ROM. There is also a patched version called VaraDOS, which is configured to use a Vortex X-drive as drive B per default. ParaDOS does not provide a way too boot CP/M from drive B.
 +
 +
=== House of Usher ===
 +
 +
Besides tape and 3 inch floppy disk release, the game [[House of Usher]] has been officially released on 5.25 inch floppy disk for the Schneider CPC with Vortex F1 floppy drive.
 +
 +
<gallery>
 +
House of Usher ads.jpeg
 +
House-of-usher-floppy-cover.png
 +
House-of-usher-floppy-no-cover.png
 +
</gallery>
 +
 +
<br />
 +
 +
== Media Coverage ==
 +
 +
<gallery>
 +
Image:Vortex Schneider CPC International 1985-09.JPG|Schneider CPC International 1985/09
 +
Image:Vortex schneider cpc international 1986-02.JPG|Schneider CPC International 1986/02
 +
Image:Vortex schneider cpc international 1986-04.JPG|Schneider CPC International 1986/04
 +
Image:Vortex schneider cpc international 1986-07.JPG|Schneider CPC International 1986/07
 +
Image:Vortex schneider cpc international 1986-08.JPG|Schneider CPC International 1986/08
 +
</gallery>
  
 
[[Category:Peripherals]] [[Category:Manual]][[Category:DATA Storage]]
 
[[Category:Peripherals]] [[Category:Manual]][[Category:DATA Storage]]

Latest revision as of 17:23, 21 October 2024

A series of external 3,5" and 5,25" floppy disc drives from Vortex providing up to 720K capacity (704K available). The Vortex drives were most popular in Germany. For more information regarding VDOS and the Vortex Disk Format, see the dedicated VDOS Wiki page.

S- and D-Drives (720K)

These are the first generation of 720K floppy disc drives from Vortex. They came in variants having either a single drive ("S" variant) or two drives ("D" variant). The "S" variant (as well as the less expensive "Z" variant) was delivered with the same double-height casing as the "D" variant, so that a second drive could be retrofitted.

The F1-S, F1-D, M1-S, M1-D drives have their own FDC765 in the controller, and this one supports all DS0 up to DS3. The Vortex interface can manage 4 floppy drives in total.

F1-S and F1-D (5,25")

The F1-S and F1-D models are based on BASF 6138 (81690-001) type 5,25" disk drives, i.e. double-sided, 80 tracks per side, 96 tpi density.

  • F1-D

  • F1-D front view

  • F1-D backside

  • F1-D interface
    (CPC 664)

  • F1-D interface board (CPC 664)

  • F1-D interface board (CPC 664)

  • F1-D interface board (CPC 6128)

  • F1-S/D manual

  • F1-S/D system disk
    (CPC 464)

  • F1-S/D system disk
    (CPC 664/6128)

The floppy controller of the F1-D / F1-S was cloned by Hans Hübner of FutureSoft with MX4 connector and without ROM slot. It supports four drives. Under FutureOS they are named E-H.

A1-S Upgrade Kit (5,25")

Vortex offered an upgrade kit consisting of a single bare drive and an installation manual, allowing to upgrade a F1-S (single) drive to a F1-D (dual) drive. To do this, one simply had to install the additional drive in the free slot of the drive case.

  • BASF 6138 spare drive

M1-S and M1-D (3,5")

The M1-S and M1-D models are based on 3,5" disk drives. Controller and DOS were identical for 5,25" and 3,5" devices.

FDA-1 3" Drive Adapter

This adapter allows to connect an external FD-1 3" drive on Vortex F1/M1 setups on the CPC 464. Since only two drives can be used at the same time, the external 3" drive first had to be selected manually with the RSX command |S. This RSX command worked also with VDOS 2.11 on CPC6128.

RSX Description
|S,1 Use 3" drive as drive A, upper Vortex drive is disabled
|S,2 Use 3" drive as drive B, lower Vortex drive is disabled
|S,0 Disable the 3" drive (default)

  • FDA-1 Adapter

  • Inside the adapter box

  • Inside the adapter box (closeup)

  • Plug (cable side)

  • FD-1 3" floppy drive plug

Clone of the F1-D controller

A clone of the F1-D controller was created by Hans Hübner of FutureSoft in 2024. The card fits on the Mother X4 board and doesn't contain an extra ROM slot. Using FutureOS this card allows to add four additional floppy disc drives to the CPC, being called E, F, G and H.

FDC I/O Ports

All types of floppy disk controllers for the F1-S/D and M1-S/D series are based on the NEC 765 chip. The manual states that on "controllers having an integrated ROM module/eprommer" (probably the later 6128 interfaces?), the port addresses can be freely configured using a decoder ROM.

CPC 464:

Address Description
0xFB7E uPD control
0xFB7F uPD data
0xFA7E motor on/off

CPC 664/6128:

Address Description
0xFBF6 uPD control
0xFBF7 uPD data
0xFA7E motor on/off

Downloads


Z-Drives (180K/side)

These are less expensive drives and were meant to be directly connected as B drive to a CPC 464 with DDI-1 or a CPC 664/6128. Since these drives ship neither with an own controller nor a VDOS ROM, they do rely fully on AMSDOS and thus only 40 tracks on one side can be accessed, resulting in the same capacity (180K/side) as the 3" drives.

F1-Z (5,25")

The F1-Z model is based on a later revision of the BASF 6138 type disk drive (81757-001), which offers more configuration options using jumpers. The drive was shipped in a "double step" configuration to use only 40 tracks, and thus the cheaper and more widely available DS DD floppy disks (48 tpi, 180K/side) could be used.

  • BASF AG 6138 (81757-001) drive

  • BASF AG 6138 (81757-001) 40 track jumper configuration

A1-Z Upgrade Kit (5,25")

Vortex offered an upgrade kit consisting of a controller, a manual, a CP/M license and an utility disk which allows a F1-Z drive to be upgraded to a F1-S drive.

M1-Z (3,5")

The M1-Z model is equipped with a single 3,5" disk drive.


X-Drives (720K)

These are the latest drives from Vortex for use with a CPC 464 with DDI-1 or a CPC 664/6128 (ie. on systems that already have a floppy disc controller); no additional controller was required anymore. Instead, a ROM module was supplied together with the drive, which provided VDOS 2.0-X. Only single-drive variants were available. The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as X-DDOS from Dobbertin).

F1-X and F1-XRS (5,25")

The F1-X model is based on either a single BASF 6138 (81690-001) or a single BASF 6139 5,25" disk drive. The BASF 6139 is a revisioned version which is slightly more compact (~1cm shorter), and also a number of electronical and mechanical design flaws that affected durability were corrected. The F1-XRS variant is equipped with an additional RS232-C interface.

  • F1-X

  • F1-X backside, showing IDC connector (CPC 464)

  • F1-X backside, showing edge connector (CPC 664)

  • F1-X inside view, showing a BASF 6139 drive

  • F1-X/M1-X manual and system utilities disk

M1-X and M1-XRS (3,5")

The M1-X model is based on a single NEC FD1035 type 3,5" disk drive. The M1-XRS variant is equipped with an additional RS232-C interface.

  • M1-X

  • M1-X backside

  • M1-X backside, showing IDC connector (CPC 464)

  • M1-X underside

  • M1-X inside view, showing the drive and power

  • M1-X inside view, close-up of the drive from above

  • M1-X inside view, close-up from the backside

X(RS)-Modul

The X-drives for the CPC 664/6128 are connected directly to the floppy port. In order to provide VDOS, the "X-Modul" (sometimes also called "VDOS module") must be connected additionally to the expansion port. This contains a ROM board that provides a VDOS 2.0-X ROM. The ROM board supplied for the CPC 464 came together with a chunky housing in which both the "X-Modul" and the DDI-1 controller were installed. All variants were also available with an additional RS232-C interface (in this case called either "XRS-Modul" or "X-Modul/RS").

  • XRS-Modul (CPC 464)

  • XRS-Modul with built-in DDI-1 visible (CPC 464)

  • XRS-Modul board beneath the DDI-1 (CPC 464)

  • XRS-Modul board backside (CPC 464)

  • X-Modul (CPC 6128)

  • X-Modul board (CPC 6128)

  • X-Modul board backside (CPC 6128)

RS232 I/O Ports

The RS232-C interface of the "XRS-Modul" was advertised to be compatible with Amstrad/Pace interfaces, but offers only one channel (so no channel B).

Address Description
0xFADC SIO data (R/W)
0xFADD SIO control (R/W)
0xFBDC 8253 counter 0 (R/W)
0xFBDD 8253 counter 1 (R/W)
0xFBDE 8253 counter 2 (R/W)
0xFBDF Mode word (W)

Downloads


Software Accessories

DOSCOPY

DOSCOPY is a CP/M 2.2 utility which allows to read and write files from IBM and Atari ST formatted 5,25" disks. It was written in 1987 by Peter Höpfner.

  • DOSCOPY physical manual

  • DOSCOPY 5,25" disk

  • DOSCOPY screenshot

Downloads

PARA 3.0

PARA 3.0 is a CP/M 2.2 utility allowing to exchange files between the CPC and other CP/M based systems. It claims to support "reading, writing and formatting of 99% of all CP/M formats" and provides a comprehensive disk format analzer. It was written in 1987 by Peter Höpfner.

  • PARA 3.0 physical manual

  • PARA 3.0 5,25" disk

  • PARA 3.0 loading screen

Downloads

PARA 3.0 PLUS

PARA 3.0 PLUS (or PARA PLUS) is an enhanced distribution of PARA 3.0 which also integrates DOSCOPY 1.3 into a single software suite.

  • PARA 3.0+ loading screen

  • PARA 3.0+ main menu

  • PARA 3.0+ format analyzer

Downloads

  • PARA 3.0+ Language:german (Vortex 720k disk image, bootable)

SPARA

SPARA was either the predecessor or a cut-down version of PARA 3.0 and was supplied with the F1-Z drives, only supporting 40 track formats.

FileCopy

FileCopy 3.0 is a comprehensive tool to copy files with up to 16 different devices (using letters A to P), it supports the Vortex 704 KB format for 80 Track drives.


3rd Party Software

FutureOS

FutureOS has support for Vortex drives, it uses the Vortex 704 KB format for 80 Track drives.

ParaDOS

ParaDOS supports Vortex X-drives and can be used as a replacement for the VDOS-X ROM. There is also a patched version called VaraDOS, which is configured to use a Vortex X-drive as drive B per default. ParaDOS does not provide a way too boot CP/M from drive B.

House of Usher

Besides tape and 3 inch floppy disk release, the game House of Usher has been officially released on 5.25 inch floppy disk for the Schneider CPC with Vortex F1 floppy drive.

  • House of Usher ads.jpeg
  • House-of-usher-floppy-cover.png
  • House-of-usher-floppy-no-cover.png


Media Coverage

  • Schneider CPC International 1985/09

  • Schneider CPC International 1986/02

  • Schneider CPC International 1986/04

  • Schneider CPC International 1986/07

  • Schneider CPC International 1986/08

Retrieved from "https://gryzor.info/index.php?title=Vortex_Disc_Drives&oldid=119699"