Difference between revisions of "Schneiderware Analog Converter"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(Created page with "The Schneiderware Analog Converter is a A/D and D/A Converter with 8 analog inputs, 2 analog outputs, published by german magazine CPC Schneider International as part of ...")
 
 
(3 intermediate revisions by one other user not shown)
Line 25: Line 25:
 
</gallery>
 
</gallery>
  
== Article ==
+
== Scanned Article ==
  
* [[Schneiderware Analog Converter|Schneiderware #7 A/D and D/A Converter]] (8 analog inputs, 2 analog outputs) (3/1987 pages 32-45)
+
* [[Media:Schneiderware 7 - Analog Converter.pdf|Schneiderware 7 - Analog Converter.pdf]] - 8 analog inputs, 2 analog outputs - '''3/1987 page 32-45''', final notes from 11/1987 page 99
 +
 
 +
== Datasheets ==
 +
 
 +
* [[Media:ADC0848 Datasheet.pdf|ADC0848 Datasheet.pdf]] - 8 channel A/D converter
 +
* [[Media:DAC0832 Datasheet.pdf|DAC0832 Datasheet.pdf]] - 1 channel D/A converter
 +
 
 +
[[Category:Peripherals]]

Latest revision as of 02:17, 29 August 2014

The Schneiderware Analog Converter is a A/D and D/A Converter with 8 analog inputs, 2 analog outputs, published by german magazine CPC Schneider International as part of their Schneiderware DIY series. The plain PCB, or the fully assembled board were also available via mail-order.

The ECB Bus connector of the board is intended to be plugged into the Schneiderware Basisplatine, but it could be also wired directly to the CPCs Expansion Port. The D/A converter additionally requires a Schneiderware Power Supply (or another external power supply with +12V) (eventually one could also use the CPC's disc drive power supply; though not tested if the supplies in the CTM644/GT65 monitors provide enough amps).

I/O Ports

Address (default) Address (alternate) Usage
FAE0h N/A Schneiderware Analog Board ADC 0848 A/D Converter (R/W)
Read: Get 8bit data from selected channel
Write: Select channel & mode; bit0..2=channel (0..7), bit3..4=mode, bit5-7=unused
  • Mode 0 (or 1) - Differential: Plus=Channel(N), Minus=Channel(N XOR 1)
  • Mode 2 - Single-Ended: Plus=Channel(N) and Minus=AGND
  • Mode 3 - Pseudo-Differential: Plus=Channel(N) and Minus=Channel(7)
FAE1h N/A Schneiderware Analog Board DAC 0832 D/A Converter #1 (W)
Write: 8bit data
FAE2h N/A Schneiderware Analog Board DAC 0832 D/A Converter #2 (W)
Write: 8bit data

Pictures

Scanned Article

Datasheets