Difference between revisions of "Howto: Alkatraz and other protections"
Dlfrsilver (Talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:Copy Protection]] | ||
Ok, you will find here the settings i use in order to transfer alkatraz protected tapes with no problems : | Ok, you will find here the settings i use in order to transfer alkatraz protected tapes with no problems : | ||
Latest revision as of 14:43, 17 December 2010
Ok, you will find here the settings i use in order to transfer alkatraz protected tapes with no problems :
- Contrôle de lecture means 'read control' in english
- Wave/mp3 is easy to translate
- Synth midi too
- Microphone must be muted
- entrée de ligne means 'in-line'
Once you have done this, Please use GOLDWAVE, and check this second pictures below :
-in line must be put to 50% and used (click select)
- Now, the most top button must be put to 76%, the one below for balance to 0%, and the third to speed = 1.00
Ok, and more than everything, on your tape recorder, put the volume slider to 50,
considering the range goes from 0 to 100.
Use then *.WAV format, 44khz, 8 bits mono, and try to dump a cassette.
It should work 100 % unless you have an error on tape.
