Changes
/* Printer Codes */
* Codes A0h..FEh are italic versions of 20h..7Eh
* Some one-digit parameters (like on/off flags) may be recognized both is binary chr(0xh) as well as ASCII chr(3xh).
* The DMP2000 (and up) support supports '''all''' Epson FX80 control codes''', plus some additional ones:
** ESC SO and ESC SI (mirrors of SO and SI) (for some reason, these mirrors are often supported by Epson-clones like Star LC10, though they are rarely found in official Epson specs)
** ESC "x" n (select NLQ/Draft mode) (the original Epson FX80 didn't support NLQ, however, the ESC x command is found in other Epson models like LX80 and FX86e)
** ESC "m" n (select IBM charset) (this seems the be an Amstrad invention, supported '''only''' by DMP3000/3160, '''not''' supported by DMP2000/2160, '''nor''' by real Epson printers, '''nor''' by Epson-clones like Star LC10). Amstrad DMP3000/3160 specific - NOT supported on DMP2000/2160, nor on real Epson printers, nor on Epson-compatibles like Star LC10DMP2000 DMP3160 FX80 Hex Decimal ASCII |Description- yy!! - 1B 6D n 27 109 n ESC m n |Select charset (0=Epson, 1=IMB#1, 2=IBM#2) <--- Amstrad specific (LX80: 0=graphics set off, 4=graphics set on) (Star LC10: not supported, uses "ESC t 0/1" for similar purpose)
== International Characters ==
