Changes
/* Manual */
<td>5-2</td><td>not used</td><td></td><td></td>
<tr>
<td>6-1</td><td>paper end contact</td><td><b>active</b></td><td>inactive</td>
<tr>
<td>6-2</td><td>buzzer</td><td><b>active</b></td><td>inactive</td>
<tr>
<td>7-1</td><td>autom. line feed (LF)</td><td><b>no LF on CR</b></td><td>autom. LF on CR</td>
<tr>
<td>7-2</td><td>autom. carriage return (CR)</td><td>autom. CR on LF</td><td><b>no CR on LF</b></td>
<tr>
<td>8-1</td><td>character set</td><td>Set 2</td><td><b>Set 1 (incl. umlauts)</b></td>
<tr>
<td>8-2</td><td>buffer full condition</td><td>print+LF</td><td><b>print only</b></td>
<tr>
<td>9-1</td><td>CANcel mode</td><td><b>valid</b></td><td>invalid</td>
<tr>
<td>9-2</td><td>character codes</td><td>IBM</td><td><b>Schneider</b></td>
<tr>
<td>10-1<br>10-2</td><td>font</td><td>see table 1</td>
<td>13-1</td><td>1 inch feed over paper edge</td><td>active</td><td>inactive</td>
<tr>
<td>13-2</td><td>control codes compatible with</td><td><b>IBM/Schneider</b></td><td>EPSON</td>
<tr>
<td>14-1</td><td>NLQ</td><td>inactive</td><td>active</td>
<tr>
<td><b>Centronics Interface</b></td>
<tr>
<td>14-2</td><td>Signal /INIT</td><td>external</td><td><b>internal</b></td>
<tr>
<td>15-1</td><td>Signal /AUTO FEED XT</td><td>external</td><td><b>internal</b></td>
<tr>
<td>15-2</td><td>Signal /SELECT IN</td><td>external</td><td><b>internal</b></td>
<tr>
<td>16-1<br>..<br>18-2</td><td>no function</td><td></td><td></td>
<tr>
<td><b>Serial RS232 Interface</b></td>
<tr>
<td>14-2</td><td>Function</td><td>OFF</td><td>ON</td>
