Difference between revisions of "Amstrad JY-1/JY-2 joysticks"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Peculiarities) |
|||
| Line 1: | Line 1: | ||
[[Image:jy2.jpg|thumb|Amstrad JY-2 Joystick]] | [[Image:jy2.jpg|thumb|Amstrad JY-2 Joystick]] | ||
| − | The original | + | The '''JY-1''', '''JY-2''' and '''JY3''' are the original [[Digital Joysticks]] from [[Amstrad]] for the Amstrad CPC computers. |
In order to push sales of Amstrad's own joysticks, Amstrad designed the CPC with only one joystick port which had two different ground levels. The idea was to sell one joystick which forwarded the second ground signal to a built-in joystick port, to which the second joystick could be connected. | In order to push sales of Amstrad's own joysticks, Amstrad designed the CPC with only one joystick port which had two different ground levels. The idea was to sell one joystick which forwarded the second ground signal to a built-in joystick port, to which the second joystick could be connected. | ||
Revision as of 07:43, 12 August 2010
The JY-1, JY-2 and JY3 are the original Digital Joysticks from Amstrad for the Amstrad CPC computers.
In order to push sales of Amstrad's own joysticks, Amstrad designed the CPC with only one joystick port which had two different ground levels. The idea was to sell one joystick which forwarded the second ground signal to a built-in joystick port, to which the second joystick could be connected.
This plan didn't fully work out for Amstrad for multiple reasons:
- The original joysticks were of bad quality, so that most users bought a JY-2 at most and a different one as second joystick.
- There were 3rd party Joystick Y-cables available, which allowed the use of any joystick on the market, rather than Amstrad's lousy ones
- Many games didn't even support two joysticks (Though for many of them you could just redefine keys to match the keypresses produced by the second joystick)
Contents
Peculiarities
- Connector for second joystick (JY-2 only)
- JY-1 had a single fire button at the top.
- JY-1 didn't use microswitches
- JY-2 had two fire buttons, one at top and one for the trigger
- JY3 had a different design, the "trigger" button was moved to the bottom, unknown if it featured a connector for 2nd joystick (?)
Pictures
JY-2 (with connector)
JY-1 or JY-2
JY3
JY3
