Difference between revisions of "Keyboard Membrane Repair/Replacement Guide"
(→Repair) |
(→Rewired PC Keyboards) |
||
| Line 31: | Line 31: | ||
=== Rewired PC Keyboards === | === Rewired PC Keyboards === | ||
| − | Cut all wires on the circuit board, and rewire them as in the CPCs keyboard matrix. Sounds simple, but it's quite a lot of work. Of course it works only with keyboards that do have a real circuit board | + | Cut all wires on the circuit board, and rewire them as in the CPCs keyboard matrix. Sounds simple, but it's quite a lot of work. Of course it works only with keyboards that do have a real circuit board, not with membrane based keyboards. Both expensive and inexpensive keyboards may contain either type. |
== Pictures == | == Pictures == | ||
Revision as of 05:44, 26 April 2010
The CPC keyboards contain fragile keyboard membranes, which have a rather low lifetime of maybe 5-10 years.
The east-german CPC clone KC Compact and apparently at least early CPC 464s as well contain a more robust real keyboard circuit board, which should give it an infinite lifetime.
Contents
Cleaning
Dual-foil membrane keyboards (as found in CPC 6128, CPC Plus, and 3rd generation CPC 464 keyboards) often only need to be cleaned.
Repair
Broken wires are most often causing problems on single-foil keyboards (as found in CPC 664, and 2nd generation CPC 464 keyboards). There is no chance to repair broken wires on the membrane by soldering (either the wire vaporizes, or the foil melts). However, one can repaint broken wires using conductive silver, which is sold as:
- English: conductive silver (or conductive paint)
- German: Leitsilber (or Silber Leitlack)
- French: vernis conducteur / résine à l'argent / colle conductrice
- Spanish: ?
the silver should be available anywhere were you can buy electronic components. It may be also available as car equipment (for repairing the rear-window heating).
Replacement
New Membranes
New membranes are available for other home computers. But none are sold for CPCs...?
Adapters for PC Keyboards
The CPCKey circuit translates the serial PC Keyboard signals to CPC keyboard matrix signals (the circuit uses a lot of components though). A simplified solution may be a single chip with built-in microprocessor, flash memory, and I/O ports.
Rewired PC Keyboards
Cut all wires on the circuit board, and rewire them as in the CPCs keyboard matrix. Sounds simple, but it's quite a lot of work. Of course it works only with keyboards that do have a real circuit board, not with membrane based keyboards. Both expensive and inexpensive keyboards may contain either type.
Pictures
CPC 664 (single-foil)
CPC 6128 (dual-foil)
CPC Plus (dual-foil)
KC Compact with robust circuit board
Weblinks
- http://amstrad.cpc.free.fr/article.php?sid=27 - How to fix the keyboard of your CPC (english)
