Difference between revisions of "8bit Printer Port (Amstrad Action)"
From CPCWiki - THE Amstrad CPC encyclopedia!
(Created page with 'External 8bit Printer Port from ''Amstrad Action Issue 38'' (November 1988). This is a rather bizarre 8bit Printer Port solution. Aside from the 8th data …') |
|||
| Line 1: | Line 1: | ||
External 8bit Printer Port from ''Amstrad Action Issue 38'' (November 1988). | External 8bit Printer Port from ''Amstrad Action Issue 38'' (November 1988). | ||
| + | |||
| + | == Description == | ||
This is a rather bizarre [[8bit Printer Ports|8bit Printer Port]] solution. Aside from the 8th data bit, it doesn't come up with any other extras: Data is only one-directional, and only Strobe and Busy control signals are implemented. | This is a rather bizarre [[8bit Printer Ports|8bit Printer Port]] solution. Aside from the 8th data bit, it doesn't come up with any other extras: Data is only one-directional, and only Strobe and Busy control signals are implemented. | ||
| − | Compared with the much older single-wire [[Happy Computer 8bit Printer Mod]] (1985), the Amstrad Action approach is terribly overcomplicated. | + | Compared with the much older single-wire [[Happy Computer 8bit Printer Mod]] (1985), the Amstrad Action approach is terribly overcomplicated. And aside from that it isn't even backwards compatible with normal the 7bit printer software. |
| + | |||
| + | == Technical == | ||
| + | |||
| + | Connects to the expansion port. | ||
| + | Port Bits Expl. | ||
| + | FBF8h N/A Strobe (W) | ||
| + | FBF8h Bit0 Busy (R) | ||
| + | FBF9h Bit0-7 Data (W) | ||
| + | Writing any value to port FBF8h issues a short Strobe signal (the length of the signal is same as /IORQ ORed with /WR). | ||
| + | |||
| + | == Scanned Article == | ||
<gallery> | <gallery> | ||
Revision as of 09:02, 26 February 2010
External 8bit Printer Port from Amstrad Action Issue 38 (November 1988).
Description
This is a rather bizarre 8bit Printer Port solution. Aside from the 8th data bit, it doesn't come up with any other extras: Data is only one-directional, and only Strobe and Busy control signals are implemented.
Compared with the much older single-wire Happy Computer 8bit Printer Mod (1985), the Amstrad Action approach is terribly overcomplicated. And aside from that it isn't even backwards compatible with normal the 7bit printer software.
Technical
Connects to the expansion port.
Port Bits Expl. FBF8h N/A Strobe (W) FBF8h Bit0 Busy (R) FBF9h Bit0-7 Data (W)
Writing any value to port FBF8h issues a short Strobe signal (the length of the signal is same as /IORQ ORed with /WR).
