The interface comes with a 128MB or 512MB 44-pin Disk-On-Module device. This is connected as master and by default the X-MASS only supports a single device.
[[File:X-MASS 512M.jpg]]
It is possible to remove this and use with other compatible ATA devices with an adaptor provided they support 8-bit data transfer. (e.g. CompactFlash).
*[http://centpourcent.net centpourcent.net]
*[https://bochsframagit.sourceforge.ioorg/techspecoffset/IDEx-mass-reference.txt IDE technical documentation (1994) from the Bochs PC emulator websiteacepansion X-Mass ACEpansion]on Framagit*[https://wiki.osdev.org/ATA Documentation about the IDE/PATA specification: ATA commands matrix, Master Boot Record (MBR), Partition Table, Cylinder Head Sector (CHS), Linear Block Address (LBA), etc...documentation on OSDev Wiki]*[https://hddguru.com/documentation/ Official technical documentation from ATA1 (1994) to ATA8 (2006)specifications]
[[Category:Peripherals]][[Category:DATA Storage]]