==== RSX commands for LambdaSpeak III ====
*|LSINIT / (for English speech) or |LSINIC (for Catalan speech) --> Use commands to initialize LambdaSpeak III after reset!*|RESET *|STOP *|SP,@text$ *|LAMBDASPEAK,@text$*|SETVOLUME,0-15 *|GETVOLUME,@v% *|SETVOICE,0-15 *|GETVOICE,@v%*|SETSPEED,0-15 *|GETSPEED,@v% *|SETDELAY,0-15 *|GETDELAY,@v%*|SPEAKMODE *|GETLANGUAGE,@v% *|ENGLISH *|SPANISH*|LAMBDA *|SSA1 *|DECTALK *|DKTRONICS*|SSASPO *|DKSPO *|SERIAL *|SEROFF*|GETMODE,@v% *|GETFMODE,@v% *|BLOCKOFF *|BLOCKON*|CONFOFF *|CONFON *|GETFAST *|GETMED *|GETSLOW*|SPEAKINFO *|SPSCREEN *|SPFILE,file$ *|DAISY *|BIGWATCH*|HAL9000 *|AMDRUM *|PCMTEST *|GETVERSION,@v% *|LED,0-255*|PLAY,address,length,delay *|EPLAY,address,length/64,delay,E-RAM*|XBLKON *|XBLKOFF *|SAYTIME *|SAYDATE *|SAYTEMP*|SETTIME, hour , minute , second *|SETDATE, year , month , day , dow *|GETTIME,@hour%,@minute%,@second% *|GETDATE,@year%,@month%,@day%,@dow%*|PCMUP,adr,StP,#P *|PCMMODE,1-4 *|PCMPLAY,chan,sample_#,#_pages,rate*|EECLR *|EETEST *|EEGET,adr,page *|EEUP,adr,StPage,#pages*|MP3SLEEP *|MP3WAKE *|GETTEMP,@t% *|HIBERNATE *|RESUME*|MP3PLAY,song *|MP3XPLAY,dir,sng *|MP3PLAYC,song *|MP3PLAYF,folder(01-99)*|MP3VOL,vol(0-30) *|MP3STOP *|MP3HOLD *|MP3CONT *|MP3RES*|LSHELP --> will display a help message
|LSHELP --> will display this message. Support can be get via PayPal: tfm@futureos.de (don't email, not connected) Support can be reached using: FutureSoft@gmx.de (don't use TFM@FutureOS.de)
=== Commands to control LambdaSpeak III ===
|LSINIT: Initializes the LambdaSpeak III when using the LambdaSpeak III ROMs. The following steps are carried out:
The passing of parameters is switched to 'fast' (using |GETFAST), the language is set to '''English ''' (|ENGLISH), the Blocking is set to OFF (|BLOCKOFF), the mode is set to Epson (|LAMBDA) and the speech delay is set to a minimum (20 ms) (|SETDELAY,1).
|LSINIC: Initializes the LambdaSpeak III when using the LambdaSpeak III ROMs. The following steps are carried out:
The passing of parameters is switched to 'fast' (using |GETFAST), the language is set to '''Spanish ''' (|SPANISH), the Blocking is set to OFF (|BLOCKOFF), the mode is set to Epson (|LAMBDA) and the speech delay is set to a minimum (20 ms) (|SETDELAY,1).
|RESET.: This is like to switch OFF and ON the LambdaSpeak III. It switches LambdaSpeak III into the dk'tronics mode.
Attention: You must use |LSINIT or |LSINIC first, else the CPC hangs!
== Links ==
=== Hardware of the LambdaSpeak III ===*More about this great piece of hardware can be found here: https://github.com/lambdamikel/LambdaSpeak*[https://youtu.be/1PeLmWa6TcY Présentation de la LambdaSpeak FS] by [[Poulette73]]
[[Category:Music and soundDIY]]
[[Category:Expansion ROM]]
[[Category:FutureOS]]
[[Category:Music and sound]]
[[Category:Peripherals]]