Changes
765 FDC
,/* Ready / Disk Changed signal */
*For 3inch floppy drives (pin26), it is a "Ready" signal. The /RDY signal is active whenever a disk is installed and rotating in the drive.
*For PC 3.5inch floppy drives (pin34), it is a "Disk Changed" signal. The /DSKCHG signal determines whether the same disk loaded during the previous disk access is still in the drive.
The simplest easiest solution to this issue is to just force the Ready signal on the cable itself. Note that However, the CPC will then hang if you type the CAT command when with no disk is present inserted (inserting a disk will unblock it).
<br>