* One not partitioned FAT16 or FAT32 formatted hard disk. You can place one to four CP/M disk image files in the root directory. Every disk image file is accessed as a separate hard disk by CP/M.
* One FAT16 or FAT32 and one to three CP/M formatted partitions. You can place one to four CP/M disk image files in the root directory of the FAT file system. Every disk image file is accessed as a separate hard disk by CP/M. CP/M disk images have priority over CP/M partitions so if you have three CP/M image files and three CP/M partitions then HDCPM will mount the three CP/M images and only the first CP/M partition. If the first partition on your hard disk is formatted to FAT16 or FAT32 then HDCPM expects to find the file CPMDSK01.IMG in the root directory. Failed to do so the system won't boot.
* For interfaces that use SD card or USB flash drive as a mass storage device ([[M4 Board]], [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/usifac-iimake-your-pc-or-usb-stick-an-hdd-for-amstrad-access-dsk-and-many-more!/ USIfAC II], [http://www.tmtlogic.com/ Symbiface III] or [https://www.cpcwiki.eu/index.php/Albireo [Albireo]]) the only supported configuration is one to four CP/M disk image files in the root directory of the FAT file system.
Currently only the master IDE device can be accessed by HDCPM. The slave device is available to be used by your favourite DOS.<br />