Difference between revisions of "Vortex Disc Drives"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
Line 4: Line 4:
  
 
These are the first generation of floppy disc drives from Vortex. They came in variants having either a single ("S" variant) or two ("D" variant) 80-track drives (BASF 6138). Initially, these drives were meant as upgrades for CPC 464 setups already equipped with a DDI-1/FD-1 drive. This resulted in a quite big controller housing inside in which the user had to install the DDI-1. In these setups, the 3-inch FD-1 drive could be connected as a second/third drive, ie. unlike most other floppy drive interfaces more than 2 drives could be connected (but only two drives could be used simultaneously). Later, interfaces also appeared for 664/6128 computers, which were considerably smaller.
 
These are the first generation of floppy disc drives from Vortex. They came in variants having either a single ("S" variant) or two ("D" variant) 80-track drives (BASF 6138). Initially, these drives were meant as upgrades for CPC 464 setups already equipped with a DDI-1/FD-1 drive. This resulted in a quite big controller housing inside in which the user had to install the DDI-1. In these setups, the 3-inch FD-1 drive could be connected as a second/third drive, ie. unlike most other floppy drive interfaces more than 2 drives could be connected (but only two drives could be used simultaneously). Later, interfaces also appeared for 664/6128 computers, which were considerably smaller.
 +
 +
* [[Media:Vortex Floppy Disk Station F1 für den Schneider CPC 464 - Benutzerhandbuch.pdf|Vortex Floppy Disk Station F1 für den Schneider CPC 464 - Benutzerhandbuch]] {{DE}} (manual)
  
 
=== Variants ===
 
=== Variants ===
Line 38: Line 40:
 
=== FD-1 drive adapter ===
 
=== FD-1 drive adapter ===
  
−
The Vortex S- and D-drives were originally intended as upgrades to CPC 464 setups already having a DDI-1/FD-1. This adapter allowed to continue using the 3" drive. Since only two drives can be used simultaneously, the drive had to be selected manually using a RSX command.
+
The Vortex S- and D-drives were originally intended as upgrades to CPC 464 setups already having a DDI-1/FD-1. This adapter allowed to continue using the 3" drive on these setups. Since only two drives can be used simultaneously, the drive had to be selected manually using a RSX command.
 
<br />
 
<br />
−
* [[Media:3-Zoll-Adapter zur VORTEX-Diskettenstation.pdf|3-Zoll-Adapter zur VORTEX-Diskettenstation]] {{DE}} (manual for Vortex adapter for connecting a 3 inch floppy drive to the Vortex Disk Station F1 controller)
+
* [[Media:3-Zoll-Adapter zur VORTEX-Diskettenstation.pdf|3" Adapter zur VORTEX-Diskettenstation]] {{DE}} (manual)
 
<br />
 
<br />
 
<gallery>
 
<gallery>
Line 61: Line 63:
  
 
These are the latest drives from Vortex for use on CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already have a FDC). Only single-drive variants were available. The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as [[X-DDOS]] from Dobbertin). These drives are well designed and strong. They are housed in a metal case with power supply (which has good protection with fuses) and have good quality drive mechanisms. The drive has jumpers on it that can be configured as needed.
 
These are the latest drives from Vortex for use on CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already have a FDC). Only single-drive variants were available. The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as [[X-DDOS]] from Dobbertin). These drives are well designed and strong. They are housed in a metal case with power supply (which has good protection with fuses) and have good quality drive mechanisms. The drive has jumpers on it that can be configured as needed.
 +
 +
* [http://www.cpcwiki.eu/manuals/Vortex%20X-Laufwerke%20Manual.de.rar Vortex X-Laufwerke] {{DE}} (manual)
  
 
=== Variants ===
 
=== Variants ===
Line 144: Line 148:
 
== Manuals ==
 
== Manuals ==
  
−
* [[Media:Vortex Floppy Disk Station F1 für den Schneider CPC 464 - Benutzerhandbuch.pdf|Vortex Floppy Disk Station F1 für den Schneider CPC 464 - Benutzerhandbuch]] {{DE}} (Manual for old drives with VDOS 1.0)
 
−
* [http://www.cpcwiki.eu/manuals/Vortex%20X-Laufwerke%20Manual.de.rar Vortex X-Laufwerke] {{DE}} (Manual for new X-drives with VDOS 2.0)
 
 
* [[Media:Vortex_Vdos_2.0_Manual.pdf|Vortex VDOS 2.0]] {{DE}} (Manual for upgrading from VDOS 1.0 to VDOS 2.0)
 
* [[Media:Vortex_Vdos_2.0_Manual.pdf|Vortex VDOS 2.0]] {{DE}} (Manual for upgrading from VDOS 1.0 to VDOS 2.0)
 
* [[Media:Manual de las Unidades Vortex.pdf|Manual de las Unidades Vortex]] {{ES}} (pdf)
 
* [[Media:Manual de las Unidades Vortex.pdf|Manual de las Unidades Vortex]] {{ES}} (pdf)

Revision as of 15:23, 25 May 2022

A series of 3.5" and 5.25" floppy disc drives from Vortex providing up to 720K capacity (704K available).

S- and D-Drives (720K/disk)

These are the first generation of floppy disc drives from Vortex. They came in variants having either a single ("S" variant) or two ("D" variant) 80-track drives (BASF 6138). Initially, these drives were meant as upgrades for CPC 464 setups already equipped with a DDI-1/FD-1 drive. This resulted in a quite big controller housing inside in which the user had to install the DDI-1. In these setups, the 3-inch FD-1 drive could be connected as a second/third drive, ie. unlike most other floppy drive interfaces more than 2 drives could be connected (but only two drives could be used simultaneously). Later, interfaces also appeared for 664/6128 computers, which were considerably smaller.

Variants

  • F1 - S Single 5.25" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
  • F1 - D Double 5.25" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
  • M1 - S Single 3.5" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11
  • M1 - D Double 3.5" drive with power supply connected via ribbon cable to interface with NEC765 and VDOS 1.0 or 2.11


  • Vortex F1-D with CPC 6128 Interface

  • An anonymous box housing the controller board

  • Look inside the controller, a NEC 765 chip and VDOS upgraded to v2.0

  • Controller with mounted VDOS chip

  • F1-D Interface (CPC 464)

  • F1-D Interface with DDI-1 installed (CPC 464)

  • F1-D Interface (CPC 664)

  • F1-D Interface Board (CPC 664)

  • F1-D Interface Board (CPC 664)

  • F1-D Interface Board (CPC 6128)

Second drive upgrade

An upgrade was available which allowed to upgrade a single -S drive to a dual -D drive.

FD-1 drive adapter

The Vortex S- and D-drives were originally intended as upgrades to CPC 464 setups already having a DDI-1/FD-1. This adapter allowed to continue using the 3" drive on these setups. Since only two drives can be used simultaneously, the drive had to be selected manually using a RSX command.


  • Adapter to connect an additional 3" disc drive in between a CPC 464 and a F1-D

  • Inside the adapter box

  • Inside the adapter box (closeup)

Z-Drives (180K/side)

These are basic and less expensive low-capacity drives and were meant to be directly connected to a CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already provide a floppy controller). Since these drives do not ship with a special controller, they do rely fully on AMSDOS and thus only 40 tracks can be accessed.

Variants

  • F1 - Z Single 5.25" drive with power supply with ribbon cable (does not come with interface containing FDC or VDOS)
  • M1 - Z Single 3.5" drive with power supply with ribbon cable (does not come with interface containing FDC or VDOS)


X-Drives (720K/disk)

These are the latest drives from Vortex for use on CPC 664/6128 or CPC 464 with DDI-1 (ie. on computers that already have a FDC). Only single-drive variants were available. The |S command (for accessing a third drive) is no longer used, the new |X command allows to swap drive A and B (same as X-DDOS from Dobbertin). These drives are well designed and strong. They are housed in a metal case with power supply (which has good protection with fuses) and have good quality drive mechanisms. The drive has jumpers on it that can be configured as needed.

Variants

  • F1 - X Single 80 track, Double Sided, 5.25" drive with power supply and ribbon cable which connects to interface containing VDOS 2.0
  • M1 - X Single 80 Track, Double Sided, 3.5" drive with power supply and ribbon cable which connects to interface containing VDOS 2.0
  • F1 - XRS same as F1-X, upgraded with RS232-C interface
  • M1 - XRS same as M1-X, upgraded with RS232-C interface


  • Vortex F1-X, with manual and utility disk

  • Vortex F1-X backside

  • Vortex M1-X

  • Vortex M1-X backside

  • Vortex M1-X backside, showing IDC connection

  • Vortex M1-X underside

  • Vortex M1-X insides, showing the drive and power

  • Vortex M1-X insides, close-up of the drive from above

  • Vortex M1-X insides, close-up from the backside

X-Modul (RS232-C Interface)

The "X-Modul" adds a RS232-C interface to -X drives. It is suspected to be at least partially compatible with Amstrad/Pace interfaces.

I/O Ports

Address Read Write
0xFADC Channel A data Channel A data
0xFADD Channel A control Channel A control
0xFADE Channel B data Channel B data
0xFADF Channel B control Channel B control
0xFBDC 8253 Load counter 0 8253 Read counter 0
0xFBDD 8253 Load counter 1 8253 Read counter 1
0xFBDE 8253 Load counter 2 8253 Read counter 2
0xFBDF Write mode word -

Vortex Disk Format

See VDOS

Drive Interface I/O Ports

The drives interfacing with their own FDC can be used with the CPC 6128 to use different I/O ports (see below).

Standard addresses (same as used by AMSDOS)

FB7Eh 765 FDC (internal) Status Register (R) FB7Fh 765 FDC (internal) Data Register (R/W) FA7Eh Floppy Motor On/Off Flipflop

Special addresses (secondary FDC)

The special addresses are mentioned in the manual for the Vortex -X drives, but apparently they are referring to other/older Vortex drives, not the -X drives. The special addresses are used only on CPC 664/6128 and only if the Vortex drive includes an FDC chip.

FBF6h 765 FDC (Vortex,ext) Status Register (Read) FBF7h 765 FDC (Vortex,ext) Data Register (R/W) FA7Eh Floppy Motor On/Off Flipflop (nearly same as normal, bit precise)

The X drive has a different PCB than the PCB for the S, the manual describes connecting the DDI-1 interface to the X drive interface and a 'decoder-ROM' which defines the I/O decoding?

  • Note1: The -Z and -X drives do not include FDC chips.

So, not sure if/when the Special addresses are used at all?

Manuals

Retrieved from "https://gryzor.info/index.php?title=Vortex_Disc_Drives&oldid=108647"