Changes

Jump to: navigation, search

Digiblaster

1,516 bytes added, 18:07, 29 June 2010
*[[Protracker|Protracker]] (by [[Crown|Crown]]) (1993)
== Pictures DigiBlaster V2 ==
<gallery caption="Soundplayer pictures (a Digiblaster based card by [[Futurs'|Futurs']])">
</gallery>
== Weblinks ==
*[http://cepece.info/amstrad/docs/digibl.html Schematics and additional information(Versions 1 + 2]  == DigiBlaster V3 == This main difference with this version of DigiBlaster is the additional Line-in connector which allows the user to feed the AY output through the card so that both sound sources get played through the same speakers. The DigiBlaster has been made dual-mono so that both speakers play the sample as is done with the AY-3-8912 Channel B. The variable resistor RV1 adjusts the Digiblasters output level to balance it to the AY level.  [[Image:DigiBlaster3_Schematic.PNG|600px|centre]]  The diodes in the original version have been removed, because they served no meaningful purpose and an R2R ladder design was used for the DAC conversion. This not only improves the linearity of the DAC greatly, bit it also ensures that the output impedance remains stable and of course means not having to buy 8 or 9 different non-standard value resistors. The completed devices look like this:  [[Image:DigiBlaster3_Types.jpg|700px|centre]]  Track layouts have been made for both Centronics and Edge-connector. As seen in the picture above, the layouts use isolation displacement connectors (the type usually intended for flat cable) which have been modified (ie: the plastic band and clips removed) so that it can be mounted directly to the PCB. 1.5mm FR4 PCB should be used preferably to give the circuit stability.  == Resources ==  [[File:DB3_Edge_Layout.pdf]] - PCB Track Layout for Edge Connector Version [[File:DB3_Cent_Layout.pdf]] - PCB Track Layout for Centronics Connector Version 
[[Category:Hardware]] [[Category:Peripherals]] [[Category:DIY]] [[Category:Music_and_sound]]
1,179
edits