Changes

Jump to: navigation, search
/* Setting the READY signal */
Last thing you need to do is set the ready signal. This is done by connecting pin 33 and 34. Its the last 2 pins on the cable. Use a bend paperclip or a small wire to short the 2 pins like so (Marked in WHITE):
[[Image:CableClose1.JPG|400px600px]]
Thats it. Now u SHOULD have a fully working 3.5" B drive.
1. Power on the floppy first.
2. Then turn on the cpc.
=== Errors at this point ===
12,273
edits