Changes
ASIC
,/* DMA commands */
A DMA control and status register (DCSR) controls which channels are currently enabled, and also tells the CPU which channel is interrupting:
* The channel enable bits in this register enable each "DMA" channel separately, and can be set by the CPU, and cleared by either the CPU, a STOP instruction, or power on resetrest.
* The interrupt bits are set when a channel is requesting an interrupt, and cleared when the CPU writes a "1" to the appropriate bit.
* The INT signal of the ASIC is the compositing of all the interrupt bits of DCSR by using the AND function.
<br>
